Sheet metal corner chamfer

Adds a chamfer on one or more sheet metal corners. You specify the corner appearance and select corners individually. All chamfers created in a single operation are one feature.

Access

Ribbon: Sheet Metal tab Modify panel Corner Chamfer

Method

Specifies how the chamfer is constructed.
One Distance	Creates a chamfer with the same offset distance from the corner on both sheet metal edges. Select a single corner or multiple corners.
Distance and Angle	Creates a chamfer defined by an offset from a sheet metal edge and an angle from that sheet metal edge to the offset. One or both corners of a selected sheet metal edge can be chamfered in one operation.
Two Distances	Creates a chamfer on a single corner with a specified distance for each sheet metal edge. Edges can be chained together.

Corners and edges

Selects one or more corners or edges.
Corner	Selects individual corners to chamfer and previews default distance.
Edge	Selects the sheet metal edge for chamfers defined by a distance and angle.
Flip	Flips the direction of the chamfer distances for chamfers defined by two distances.

Distance and angle

Specifies the extents of the selected chamfer method.
Distance	Specifies the offset distance from a selected sheet metal edge for chamfers defined by one distance, or by a distance and angle.
Angle	Specifies the angle applied to chamfers defined by a distance and angle.
Distance1	Specifies the first offset distance for chamfers defined by two distances.
Distance2	Specifies the second offset distance for chamfers defined by two distances.