Edit iFeature dialog box

Access:

Ribbon: iFeature tab iFeature panel Edit iFeature

Selected Features

Lists the features and sketches included in the iFeature.

The first sketched feature listed is the base feature of the iFeature. The sketch in the base feature is used to position the iFeature when it is placed.

Size Parameters

Lists iFeature parameters. Double-click in a value to edit the value.

• Name: Give the parameter a descriptive name. Choose a name that is useful when reusing the iFeature, such as the parameter function. The name appears in the browser when the iFeature is placed.
• Value: The default is the current parameter value. The new value is restricted by the value in the Limit field.
• Limit: Restricts entries in the Value edit box. Click arrow to list options.
  • None: No restrictions are placed on the Value field.
  • Range: The Specify Range dialog box shows the parameter Name in its title bar. Specify minimum and maximum values, including less than, equal to, and infinity symbols. A default value can be entered. In the Minimum field, negative values allow the placed iFeature to change the depth direction or position of a sketch curve relative to an edge.
  • List: Enter values or paste from the Clipboard. Click in the Value field to enter a value; click below the last row to add another value. If values are pasted from a spreadsheet, values are placed on separate lines in the Value box. Values are sorted when the list is reopened.
• Prompt: The text entered in this box appears in a dialog box when the iFeature is placed. Enter descriptive instructions that clarify usage. Click in the Prompt field to edit.

Position Geometry

Specifies the geometry used to position the iFeature.
Name	Describes the position geometry. The default is the name displayed in the Selected Feature tree.
Prompt	Instructions for positioning the iFeature when it is placed in a part file. (Usually, instructions for positioning the iFeature on a plane or face.)