Fillet grill feature

To fillet all the edges of the grill with a larger radius around the grill boundary and a smaller radius on the grill ribs:

  1. On the ribbon, click 3D Model tab Plastic Part panel Rule Fillet .
  2. Verify that the Source is set to Features and the Rule is set to Against Part.
  3. Select the grill and enter an appropriate radius for the edges at the intersection between the grill and the target part body.
  4. Click to Add another rule.
  5. Make sure that the Source is set to Features and the Rule is set to Free Edges.
  6. Select the grill and enter an appropriate radius for the remaining edges.
  7. Click OK to complete the rule-based fillet.
Parent topic: Rule-based fillet features