Defining the Workpiece

In this section, you define the workpiece used to create the core and cavity for the mold.

1. On the ribbon, click Core/Cavity tabParting Design panel Define Workpiece Setting.
2. Maintain the default workpiece type. In the X_total field, enter 250 mm. In the Y_total field, enter 160 mm. In the Z_total field, enter 80 mm.
3. Click OK on the Define Workpiece Setting dialog box to accept the parameters and close the dialog box. The workpiece appears as shown in the following image.
4. Alternately, if you have enabled Prompt for File Names, click OK to accept the defaults in the File Naming dialog box to place the workpiece.
   

Previous | Next