Generate reports of analysis simulations. The Report dialog box is divided into four sections: General, Properties, Simulations, and Format. This page explains the controls on the Simulations tab.
|
Access: |
Ribbon:
Stress Analysis tab
Report panel
Report
|
The following options are visible regardless of the active tab.
| Complete | Selects all default fields for publishing to the report. |
| Custom | You are able to modify the report output. On each tab in the dialog box, check the boxes for the information you want displayed in the report. |
Simulations tab
The simulation attributes and results are presented in a tree view. Options to Select All and Unselect All are provided.
If you activate the report command without a simulation selected, all simulations in the document are listed and checked for inclusion in the report.
If you use the context menu of a specific simulation to access the Report command, only that simulation has check marks. All other simulations have the check boxes cleared.
Select all content to publish with the current report request. You can specify more than one simulation.
In addition to the view captured for the report, an Opposite Camera View is provided and checked by default. Clear the check box if you do not want to include this view.
| Tree View List | Displays simulation attributes and results. By default, all are selected. Clear check marks for any items you do not want in the report. These settings are maintained with the file. |
| Select All | Selects all attributes and results, and places a check mark in the box next to the entry. You can clear individual entries after you use this command. |
| Unselect All | Clears all entries, removing the check mark from the box. You can select individual entries after you use this command. |
| Reset | Resets all entries to the state they were in when the dialog box first displayed, whether selected or cleared. |
Tree View Layout
| Simulation | |||
| Opposite Camera View | |||
| Material | |||
| Loads | |||
| Graphics View | |||
| Constraints | |||
| Graphics View | |||
| Results | |||
| Stress | |||
| Von Mises Stress | |||
| 1st Principal Stress | |||
| 3rd Principal Stress | |||
| Stress XX | |||
| Stress XY | |||
| Stress XZ | |||
| Stress YY | |||
| Stress YZ | |||
| Stress ZZ | |||
| Displacement | |||
| Displacement | |||
| X Displacement | |||
| Y Displacement | |||
| Z Displacement | |||
| Strain | |||
| Equivalent Strain | |||
| 1st Principal Strain | |||
| 3rd Principal Strain | |||
| Strain XX | |||
| Strain XY | |||
| Strain XZ | |||
| Strain YY | |||
| Strain YZ | |||
| Strain ZZ | |||
| Contact Pressure | |||
| Contact Pressure | |||
| Contact Pressure X | |||
| Contact Pressure Y | |||
| Contact Pressure Z | |||
| Reaction Force | |||