Provides detailed information about the fill.
Represents the predicted elapsed time from the beginning of the injection cycle until the mold is filled. In the case of an imperfectly designed mold, estimates the elapsed time before short shot occurs.
Specifies the maximum injection pressure obtained when calculating the results.
Specifies the total area of the cavity as projected through the parting plane.
Max. clamp force during filling
Specifies the maximum force required by the clamp unit to keep the mold closed during filling.
Velocity and pressure switch over at percent volume
Indicates what percentage of the cavity is filled before the molding machine switches from velocity control to pressure control.
Velocity and pressure switch-over at time
Indicates the time at which the molding machine switches from velocity control to pressure control.
Total part weight at the end of filling
The total weight of the part, at the end of the filling phase.
Specifies the total volume of plastic required to fill the cavities.