Create a bend table

1. On the ribbon, click Annotate tab Table panel General .
2. On the drawing sheet, select a flat pattern drawing view of a sheet metal part.

3. In the Table dialog box:

   • Click Column Chooser and add or remove columns from the bend table.
   • Set format of the BEND ID string.
4. Click OK to close the dialog box.
5. Place the table on the drawing sheet.

Note: Alpha character Bend ID relies on the specific character set of the language used during installation. As an example, the bend order number ‘27’ would be displayed as ‘AA’ if the Alpha option was selected and the language of installation was English.

Tip: To exclude particular characters from the alphanumeric auto-indexing sequence, change the Character Exclude options on the General tab of the Standard Style panel.

Create bend tags

Bend tags are added to the selected drawing view automatically after the bend table is inserted in the drawing.

To add bend tags in a drawing view manually:

1. Right-click the bend table.
2. Select Add Tags to View from the menu.
3. Select the drawing view to place bend tags.