Rhino Import Options dialog box

Sets the options for the import of a Rhino file.

Access:

In the Open, Place Component, or Import dialog boxes: Set the Files of type to *.3dm. Select or browse to the file. Click Options. Note: If you choose to translate a file using the Import command, some import options are not available.

Save Options	Save Components during Load. Select the check box to save the component files in Autodesk Inventor format during the import process. Choose where to save the components from the drop-down menu. If you choose to Select Save Locations, the Component Destination Folder becomes available. This setting is not available when the Import command is used.   Component Destination Folder. Sets the location for the component files created from the import operation. If Save in Workspace is selected, this folder is defined in the Edit Projects panel.   Note: Specify file destinations that are included in the active project or add the paths to the project to assure that referenced files resolve when you open a file.
Translation Report	Embed in Document. Select to display the translation report icon , under the 3rd Party browser node , in your new file. To view the translation report, double-click the report icon, or right-click and select Edit.   Save to Disk. Select to save a copy of the report to the Component Destination Folder.
Entity Types to Import	Solids. Select to import solid bodies and water tight stitched shells as individual solid bodies.   Surfaces. Select to import surface bodies. Water tight stitched shells are imported as solid bodies.   Wires. Select to import wires. Points. Select to import points.
Data Organization	Import into Repair environment. Select to check the model for errors and create a repair node in the browser. You can edit, diagnose, and repair an imported base body in the Repair environment. A repair body participates in the model history. Create Surfaces As. Select the surface types to create during the import. Choose from: Individual Surface Bodies to import each surface as a single surface body in the part environment. Single Composite Feature to import the surfaces as a single composite in the part environment. Multiple Composite Features to import the surfaces as multiple composites in the part environment. Single Construction Group to import the surfaces as a single group in the construction environment. Multiple Construction Groups to import the surfaces as multiple groups in the construction environment. Note: Enable the Construction Environment on the Part tab in the Application Options to make Single Construction Group and Multiple Construction Groups available.   Group Name to Place Data. Select a Group Name under which to place the imported data. The group name is shown in the browser.
Units	Import Units. Converts the imported geometry and parameter values to the selected units.
Post Processes	Check Parts during Load. Not selectable. This quality check of the imported data is automatically performed when you select to create surfaces as Composite features. It is not performed when you select to create surfaces as Construction groups. If bad data is found, the composite is marked with in the browser and the remaining bodies are not checked.   Auto Stitch and Promote. When selected, Inventor attempts to stitch surfaces into a quilt or solid. If the surfaces are stitched into a single quilt or body, the resulting quilt or body is promoted to the Part environment. Otherwise, the surfaces remain in the Construction environment.   Enable Advanced Healing. If selected, advanced healing operations like surface trimming, spline surface reconstruction, and the re-intersection of surfaces, are performed on the imported models to make them watertight and usable in Autodesk Inventor. Due to the nature of the healing operation, the process can add computational time to the import process and slight alterations to geometry in the original file may occur.