Edit Section Properties dialog box

Edit the depth of an existing Section View. Include or exclude a Slice operation in an existing Section View.

Access:

Right-click a section view, and then click Edit Section Properties.

Section Depth

Depth Control	Controls the section depth. Select Full to create the section view to all geometry beyond the cutting line. Select Distance to specify a distance of viewing in model units beginning from the cutting line.
Distance	Sets the distance of the section. Note: Set the section depth to zero to revert to the smallest available section depth. This is not a true zero-depth section. The actual value is 0.000012.

Slice

Include Slice

When checked, the Section View is created with the part sliced depending on the Browser attributes.

Method

Specifies the method of projecting the section view when you either sketch a multi-segment section line or select a view sketch containing a multi-segment section line.
Projected	Created projected view from the sketch line. Note: This option is set as the default if all segments are exactly 90 degrees.
Aligned	When checked, resulting section view is perpendicular to the line of projection. Body cut lines do not display in the resulting view. Aligned option is not available for a child (dependent) view. Note: This option is only available when Include Slice option is checked.