Sets the options for the import of an Alias file.
| Access: |
In the Open or Import dialog boxes:
Note: If you choose to translate a file using the Import command, some import options are not available.
|
|
Translation Report |
Embed in Document. Select to display the translation report icon
Save to Disk. Select to save a copy of the report to the Component Destination Folder. |
|
Entity Types to Import |
Solids. Select to import solid bodies and water tight stitched shells as individual solid bodies.
Surfaces. Select to import surface bodies. Water tight stitched shells are imported as solid bodies.
Wires. Select to import wires. |
|
Units |
Import Units. Converts the imported geometry and parameter values to the selected units. |
|
Post Processes |
Check Parts during Load. Not selectable. This quality check of the imported data is automatically performed when you select to create surfaces as Composite features. It is not performed when you select to create surfaces as Construction groups. If bad data is found, the composite is marked with
Enable Advanced Healing. If selected, advanced healing operations like surface trimming, spline surface reconstruction, and the re-intersection of surfaces, are performed on the imported models to make them watertight and usable in Autodesk Inventor LT. Due to the nature of the healing operation, the process can add computational time to the import process and slight alterations to geometry in the original file may occur. |
, under the 3rd Party browser node 
, in your new file. To view the translation report, double-click the report icon, or right-click and select Edit. 
in the browser and the remaining bodies are not checked.