In this task, you review the Volumetric shrinkage at ejection results.
Click Volumetric shrinkage at ejection in the Study Tasks list. (Pic VolShr.png)
Click to animate the result.
Rotate, pan, and zoom as necessary to see the results.
The volumetric shrinkage for this material typically ranges from about 0.5% to 4.25% in a 3-mm wall. the nominal wall thickness for this part is 3-mm. However, variation in shrinkage is best when smaller. The maximum shrinkage is approaching 5 percent and the minimum in the nominal wall is about 1.7%. It would be better if most of the part was within 2% shrinkage. The main problem is the higher shrinkage at the end of fill.