Warp analysis

A Warp analysis is used to diagnose the cause of warping and recommend a solution, such as gate location changes, design parameter changes, or reduction of wall thickness variations.

Warp analysis is supported for Dual Domain and 3D analysis technologies.

Warpage is affected greatly by fiber orientation. Warpage in an injection molded part is caused by variations in shrinkage that occur:

• From region to region in the part.
• Through the thickness of the part.
• Parallel and perpendicular to the direction of material orientation.

Any attempt to predict the likelihood and amount of warpage for a particular component must first account for these shrinkage variations.

The material that is used influences the warpage of the part. Sometimes you must choose a material with low, uniform shrinkage to achieve dimensional accuracy. These materials are usually more expensive, but you may be able to use a cheaper material and save costs by observing shrinkage and warpage design principles.

Note: Differential shrinkage caused by fiber orientation is one of the main causes of warpage.

The results of a Fiber Orientation analysis can be used as input for a Warp analysis to provide more detailed results and greater accuracy.