|
Constraints
|
| 3D |
Creates a non-planar beam system in which the elevation of a beam is defined by its sketch lines. See Creating a 3D Beam System. |
| Elevation |
The vertical offset of beam system beams from the beam system work plane. |
| Work Plane |
This is a read-only value that is dependent on the work plane where the element was placed. |
|
Pattern
|
| Layout Rule |
Rules for beam spacing. See Beam System Layout Rules and Patterns. |
| Fixed Spacing |
The space between beams. This parameter is only accessible for certain values of the Layout Rule parameter. See Beam System Layout Rules and Patterns. |
| Centerline Spacing |
The distance between beam centerlines. This is a read-only parameter. |
| Justification |
Specifies the starting location (beginning, end, or center) of the beam system in relation to the selected boundary. |
| Beam Type |
The structural framing type to be used for creating beams in a beam system. |
|
Identity Data
|
| Tag new members in view |
Specifies the view in which to display new beam elements added to the beam system. See Modifying Beam System Tags. |
| Comments |
User comments. |
| Mark |
A label created for the beam system. This value must be unique for each element in a project. Revit warns you if the number is already used but allows you to continue using it. You can see the warning using the Review Warnings tool. See Reviewing Warning Messages. |
|
Phasing
|
| Phase Created |
Indicates in which phase the beam system was created. See Project Phasing. |
| Phase Demolished |
Indicates in which phase the beam system was demolished. See Project Phasing. |