Placing a Railing on a Host

Place a railing on a stair or ramp.

To change the railing position after placement

You can have a railing created automatically when you create a stair or ramp, or place the railing after the component is created. When you place a railing on a component-based stair, you can choose to place it on the stair treads or stringers.

1. Click Architecture tabCirculation panelRailing drop-down (Place on Host).
2. For placement on stairs only: On the Position panel, click Treads or Stringer.
3. In the Type Selector, select the type of railing to place.
4. Select the host component in the drawing area.
   Note: Possible host components, such as a stair or ramp without a railing, highlight as you position the cursor over them.
5. To change the railing position between placement on the treads or stringers, select the railing in a plan or elevation view, and click the Flip Railing Direction (double arrow) control.
   
6. To further adjust the railing position on the tread/stringer, modify the value of the railing instance property, Tread/Stringer Offset.

   If you place the railing on the stringers, the default value for this property is "1/2 Stringer Width." If you place the railing on the treads, the default value is 1".)