Rebar Type Properties

The following table describes each parameter contained in the Rebar Type Properties dialog. To access this table, select a rebar instance and then select Modify | Structural Rebar tabProperties panel Type Properties.

Name	Description
Constructions
Deformation	Specifies the deformation parameter for the selected bar type (deformed or plain). This parameter is taken into account in analysis.
Rounding Overrides	Specifies the rounding parameters for the selected bar type. This overrides the rounding parameters defined in the Rebar Instance Properties dialog. Note: This parameter is available only if reinforcement rounding was specified in the project.
Graphics
Subcategory	Used to provide graphic overrides of rebar by subcategory. To create a new subcategory, click Manage tabSettings panelObject Styles. In the Structural Rebar category add new subcategories beneath the main category.
Materials and Finishes
Material	Specifies rebar materials. Select materials in the Materials dialog.
Dimensions
Bar Diameter	Specifies the diameter of the selected bar type. Refer to the images in Rebar Hook Length Parameters.
Standard Bend Diameter	Specifies the diameter of non-hook bends for the selected bar type. Refer to the images in Rebar Hook Length Parameters. This parameter does not affect rebar shape.
Standard Hook Bend Diameter	Specifies the diameter of hook bends for the selected bar type. Refer to the images in Rebar Hook Length Parameters. This parameter does not affect rebar shape.
Stirrup/Tie Bend Diameter	Specifies a rebar bend diameter that can be either a standard bend or stirrup/tie bend. This parameter defines the radii for the selected bend type. Refer to the images in Rebar Hook Length Parameters.
Hook Lengths	Specifies hooks based on a specific bar type. Click Edit to open the Rebar Hook Length dialog. Refer to the images in Rebar Hook Length Parameters.
Maximum Bend Radius	Specifies the Maximum Bend Radius for rebar schedules. Its purpose is to compensate for rebar that is bent in the field due to larger bend diameters.
Identity Data
Keynote	The keynote text.
Model	The manufacturer internal number.
Manufacturer	The rebar manufacturer.
Type Comments	General comments about the rebar type. You can include this information in a schedule.
URL	Specifies a link to a web page that contains type-specific information. Click the icon to establish a link.
Description	An optional description of the rebar type.
Assembly Description	The uniformat classification for the currently selected assembly code.
Assembly Code	Specifies the uniformat assembly code.
Type Mark	A type-specific label used, for example, as a shop mark. This value must be unique for each element in a project. Revit warns you if the value is in use, but allows you to continue using it. You can see the warning using the Review Warnings command. See Reviewing Warning Messages.
Cost	The user-defined cost of the rebar.