The following table describes each parameter contained on the Fabric Area Properties palette.
| Name | Description |
|---|---|
| Construction | |
| Fabric Sheet | Indicates the type of fabric sheet. |
| Location | Specifies the location of the fabric sheet in the host element (either Top or Bottom for floors and foundation slabs; Internal or External for walls). |
| Lap Splice Position | Specifies the position of the major or minor lap-splices (Aligned, Major Half-way Stagger, Major Passing Stagger, Minor Half-way Stagger, or Minor Passing Stagger). See Positioning the Fabric Sheet Lap-Splice. |
| Major Lap Splice Length | Specifies the length of the major lap-splice. The availability of the parameter depends on fabric sheet alignment. |
| Minor Lap Splice Length | Specifies the length of the minor lap-splice. The availability of the parameter depends on fabric sheet alignment. |
| Additional Cover Offset | Specifies an additional offset to the outside face of fabric sheet. |
| Structural | |
| Total Sheet Mass | Calculates and displays the total sheet mass (read-only). |
| Identity Data | |
| Tag new members in view | Indicates placement of tags and symbols for new fabric sheets in the current view. |
| Comments | User comments. |
| Mark | A label used, for example, as a shop mark. This value must be unique for each element in a project. Revit warns you if the value is in use, but allows you to continue using it. You can see the warning using the Review Warnings command. See Reviewing Warning Messages. |
| Phasing | |
| Phase Created | Indicates the creation phase of the host element. See Project Phasing. |
| Phase Demolished | Indicates the demolition phase of the host element. See Project Phasing. |