Results

The simulation results are displayed as a range of colors on the model, where blue indicates the minimum value, and red indicates the maximum value. The legend is also displayed to help you better understand results.

Several results are available after you have run a simulation with Dalton.

• Pressure
• Velocity
• Temperature
• Reynolds Number
• Flow Rate
• Mass Flow Rate

To visualize simulation results

By default, Dalton displays the Pressure result on the model. Follow the instructions below to visualize other simulation results.

1. In the Results panel, click the arrow below the available result, to display the full list of results.
2. Select a result from the list.

The display updates to show the selected result.

To visualize results on a specific area of the Circuit

• Go to the Dalton Project Manager, and navigate to the element of your choice.

For each element of the circuit, individual results are listed under the Results section.

Note: if the Dalton Project Manager is not available, click User Interface panel Project Manager to display it.

To export results

Once results are available for your circuit, you can export them as a csv file and share them with your team.

1. Click Results panel Export .
2. Select the circuits for which you want to export results, and then click OK.
3. Specify the location where you want to export your results, and then click OK.