To Specify the Default Display Configuration

Use this procedure to specify the default display configuration applied to new viewports, model space, or tiled viewports in the current drawing. Existing viewports with assigned display configurations are not affected.

Note: You can also assign the default display configuration in the Display Manager. Right-click the display configuration, and click Set as Drawing Default.

1. Click Utilities Drawing Setup.
2. Click the Display tab.
3. Under Drawing Default Display Configuration, select the display configuration to apply to new viewports, or when the TILEMODE system variable is set to 1.
4. Click OK.
5. If necessary, click View tabAppearance panelRegenerate drop-downRegenerate Drawing And Viewports to update the display to show the new display configuration.
   Note: Alternatively, you can enter rea (Regenerate All) at the command prompt.