Create a solid wedge with rectangular or cubical faces.
The base of the wedge is drawn parallel to the XY plane of the current UCS with the sloped face opposite the first corner. The height of the wedge is parallel to the Z axis.
Wedge Creation Options
Use the following options to control the size and rotation of the wedges you create:
- Create a wedge with sides of equal length. Use the Cube option of the WEDGE command.
- Specify rotation. Use the Cube or Length option if you want to set the rotation of the wedge in the XY plane.
- Start from the center point. Use the Center Point option to create a wedge using a specified center point.