Drawing Audit Dialog Box

Detects problems related to wire numbers in the active project and displays a report of them.

Find

 Command entry:  AEAUDITDWG

Drawing Audit identifies and cleans up some of the problems that can affect an AutoCAD Electrical drawing. Save the error report file for reference or surf the file to view and correct errors.

Audit drawing or project	Specifies to run the audit on the active drawing or selected drawings in the active project.
Previous	Redisplays the last audit report that was run. You can then surf to the performed function, save the report, or print the report for reference.
Surf	Goes to the error location within the drawing where the error occurred and was fixed.
After you click OK, you can select the type of drawing audit to run. If you selected to audit the project, select the drawings in the active project to audit, and click OK.
Wire gap pointers	Looks for problems related to missing wires which were connected through gap pointers.
Bogus wire number and color/gauge label pointers	Looks for and cleans up wires pointing to nonexistent wire numbers (it is the opposite of wire number floaters). Also looks for bad color/gauge label pointers.
Zero length wires	Looks for and erases zero length line entities on the wire layer.
Wire number floaters	Looks for and erases wire numbers that are not linked to a wire network (for example, the wire was manually erased but wire number remains).
Show wires (mark in red)	Draws an outline around each wire entity. Bright red outline - regular wires Magenta outline - wires on layers defined as No Wire Numbering. (Available when running on the active drawing only.)