E-Links - Commands

• Show

  E-Elink (External) model, to be visible or turned off within the master model.

• Enable

  E-Elink (External) model, if "Enabled" the model can be selected. If disabled the E-Elink is locked for selection within the master model.

• Reload

  E-Elink (External) model, path location will be reloaded & refreshed back into the master model.

• Remove

  E-Elink (External) model, option to be removed from the master model.

• Properties

  E-Elink (External) Option to Re-coordinate / position the model datum, by the use of "External Link" command.