Adds a chamfer on one or more specified sheet metal corners.
- Access
-
Ribbon:
Sheet Metal tab
Modify panel
Corner Chamfer
- Method
- Specifies how the chamfer is constructed.
- One Distance
- Creates a chamfer with the same offset distance from the corner on both sheet metal edges. Select a single corner or multiple corners.
- Distance and Angle
- Creates a chamfer defined by an offset from a sheet metal edge and an angle from that sheet metal edge to the offset. One or both corners of a selected sheet metal edge can be chamfered in one operation.
- Two Distances
- Creates a chamfer on a single corner with a specified distance for each sheet metal edge. Edges can be chained together.
- Corners and edges
- Selects one or more corners or edges.
- Corner
- Selects individual corners to chamfer and previews default distance.
- Edge
- Selects the sheet metal edge for chamfers defined by a distance and angle.
- Flip
- Flips the direction of the chamfer distances for chamfers defined by two distances.
- Distance and angle
- Specifies the extents of the selected chamfer method.
- Distance
- Specifies the offset distance from a selected sheet metal edge for chamfers defined by one distance, or by a distance and angle.
- Angle
- Specifies the angle applied to chamfers defined by a distance and angle.
- Distance1
- Specifies the first offset distance for chamfers defined by two distances.
- Distance2
- Specifies the second offset distance for chamfers defined by two distances.