Value > MAXWrapper > Node > GeometryClass > Spindle |
The height of the spindle, along the central axis.
Negative values create the spindle below the construction plane.
The height of the conical caps.
The minimum value is 0.1; the maximum value is ½ the absolute value of the Height setting.
When greater than 0, creates a bevel at the edge of the caps.
The number of sides around the spindle.
Higher numbers shade and render as true circles with Smooth on.
Lower numbers create regular polygonal objects with Smooth off.
The number of concentric divisions along the center of the spindle's top and bottom.
The number of divisions along the spindle's major axis.
The start angle (on the local Z-axis) for slicing.
The stop angle (on the local Z-axis) for slicing.
1- enable mapping coordinates,
0 - disable mapping coordinates.
Enables/disables the real-world map size option.
Available in 3ds Max 8 and higher.