The Hot Gate Pressure Controller dialog is used to specify the variation in pressure over time at a hot gate control location.
The data defined on the dialog is saved to a property set with the description shown in the Name box.
If you specify a pressure profile on the gate of:
| Time(s) | Pressure (MPa) |
|---|---|
| 2 | 10 |
| 10 | 20 |
A constant pressure will be applied at 10 (MPa) from 0 to 2 (s), then will increase to 20 (MPa) within 8 (s). If you specify a pressure profile on the gate of:
| Time(s) | Pressure (MPa) |
|---|---|
| 0 | 0 |
| 2 | 10 |
| 10 | 20 |
The pressure will increase from 0 to 10 MPa within 2 (s), then increase to 20 (MPa) within 8 (s).