Publish DXF to Autodesk® Buzzsaw

Export the current design to a DXF file, and publish it to Autodesk® Buzzsaw.

1. Click Publish DXF to Autodesk® Buzzsaw.
2. In the DXF Publish dialog, if the desired setup is not listed under Select Export Setup, select a different one from the drop-down list. To modify the selected setup or create a new one, click (Modify Export Setup); otherwise, skip to step 4.
   The left panel of the Modify DWG/DXF Export Setup dialog lists all existing export setups. Settings for the currently selected setup display on the tabs. Use the following controls to manage setups:

   	New Export Setup. Uses default settings.
   	Duplicate Export Setup. Creates new setup using settings from the currently selected setup.
   	Rename Export Setup. Prompts you to specify new name for currently selected setup.
   	Delete Export Setup. Deletes the selected setups (except for the default <in session export setup> which cannot be deleted).

3. In the Modify DWG/DXF Export Setup dialog, specify export options as needed on the following tabs:
   • Layers (See Layer Mapping for DWG/DXF Export)
   • Lines (See Set Linetypes for DWG/DXF Export)
   • Patterns (See Pattern Mapping for DWG/DXF Export)
   • Text & Fonts (See Specify Text Treatment for DWG/DXF Export)
   • Colors (See Specify Colors for DWG/DXF Export)
   • Solids(See Specify Solids for DWG/DXF Export)
   • Units & Coordinates (See Specify Units and Coordinates for DWG/DXF Export)
   • General (See Specify General Options for DWG/DXF Export)
4. In the DXF Publish dialog, specify which views and sheets to publish.

   If you want to publish…	Then…
   a single view	for Export, select <Current View/Sheet Only>.
   multiple views and sheets	for Export, select <In session view/sheet set>, and then select the views and sheets to export (see About Creating View and Sheet Sets).

5. If you are ready to publish, click Publish. (Or click Save Set & Close to save the current export settings and close the dialog without publishing.)
6. In the Publish to Autodesk® Buzzsaw dialog, under Autodesk® Buzzsaw Sites, select the site to which you want to publish project files.

   If you need to add a new Autodesk® Buzzsaw location, click Add. For instructions, see Add a New Autodesk® Buzzsaw Location.

7. Enter a name, or accept the default name, for the exported file.
8. For Files of type, select an AutoCAD version for the published DXF file.
9. For Naming, select an option for the automatically generated file name.
10. If you want any Revit or DXF links in the project to be published to a single file rather than to several files that reference each other, make sure the Export views on sheets and links as external references option is cleared. (The default setting for this option is specified on the General tab of the Modify DWG/DXF Export Settings dialog referenced in step 3.)
11. Click Publish.

Revit generates a DXF file and posts it on the specified Autodesk® Buzzsaw site.