Note: Void geometry only cuts existing geometry. If you need the void to act upon solids created after the void is in place, use the Cut Geometry tool.
Edit an Extrusion
You can modify the extrusion profile or change the extrusion properties.
Create a Blend
Create a solid 3D shape that changes along its length, blending from a starting shape to an ending shape.
Edit a Blend
You can change the depth value and modify the top and base of the blend.
Create a Revolve
Create a 3D shape by sweeping a 2D profile around an axis.
Edit a Revolve
Modify the sketch for the revolve geometry or change the properties.
Create a Sweep
Create a 3D shape by sweeping a 2D profile along a path.
Create a Segmented Sweep
Create a segmented sweep by setting 2 sweep parameters and sketching a path with arcs.
Edit a Sweep
Modify the sweep path, profile, and properties.
Create a Swept Blend
The shape of the swept blend is determined by the starting shape, the ending shape, and the 2D path that you specify.
Edit a Swept Blend
Modify the path, the profiles, and the properties for the swept blend.
Cut Geometry
With the Cut Geometry tool, you can pick and choose which geometry gets cut and which does not, regardless of when you created the geometry.
Uncut Geometry
Select which geometry does not get cut when you join geometry.