円形状配列複写を作成する(.NET)

次の例は、円を作成し、その円を円形状に配列複写します。基点(4, 4, 0)を中心に 180 度の間に 4 つの円を作成します。

VB.NET

Imports Autodesk.AutoCAD.Runtime
Imports Autodesk.AutoCAD.ApplicationServices
Imports Autodesk.AutoCAD.DatabaseServices
Imports Autodesk.AutoCAD.Geometry
 
Public Shared Function PolarPoints(ByVal pPt As Point2d, _
                                   ByVal dAng As Double, _
                                   ByVal dDist As Double)
 
  Return New Point2d(pPt.X + dDist * Math.Cos(dAng), _
                     pPt.Y + dDist * Math.Sin(dAng))
End Function
 
<CommandMethod("PolarArrayObject")> _
Public Sub PolarArrayObject()
    '' Get the current document and database
    Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
    Dim acCurDb As Database = acDoc.Database

    '' Start a transaction
    Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()

        '' Open the Block table record for read
        Dim acBlkTbl As BlockTable
        acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, _
                                     OpenMode.ForRead)

        '' Open the Block table record Model space for write
        Dim acBlkTblRec As BlockTableRecord
        acBlkTblRec = acTrans.GetObject(acBlkTbl(BlockTableRecord.ModelSpace), _
                                        OpenMode.ForWrite)

        '' Create a circle that is at 2,2 with a radius of 1
        Using acCirc As Circle = New Circle()
            acCirc.Center = New Point3d(2, 2, 0)
            acCirc.Radius = 1

            '' Add the new object to the block table record and the transaction
            acBlkTblRec.AppendEntity(acCirc)
            acTrans.AddNewlyCreatedDBObject(acCirc, True)

            '' Create a 4 object polar array that goes a 180
            Dim nCount As Integer = 1

            '' Set a value in radians for 60 degrees
            Dim dAng As Double = 1.0472

            '' Use (4,4,0) as the base point for the array
            Dim acPt2dArrayBase As Point2d = New Point2d(4, 4)

            While (nCount < 4)
                Dim acEntClone As Entity = acCirc.Clone()

                Dim acExts As Extents3d
                Dim acPtObjBase As Point2d

                '' Typically the upper-left corner of an object's extents is used
                '' for the point on the object to be arrayed unless it is
                '' an object like a circle.
                Dim acCircArrObj As Circle = acEntClone

                If IsDBNull(acCircArrObj) = False Then
                     acPtObjBase = New Point2d(acCircArrObj.Center.X, _
                                               acCircArrObj.Center.Y)
                Else
                     acExts = acEntClone.Bounds.GetValueOrDefault()
                     acPtObjBase = New Point2d(acExts.MinPoint.X, _
                                               acExts.MaxPoint.Y)
                End If

                Dim dDist As Double = acPt2dArrayBase.GetDistanceTo(acPtObjBase)
                Dim dAngFromX As Double = acPt2dArrayBase.GetVectorTo(acPtObjBase).Angle

                Dim acPt2dTo As Point2d = PolarPoints(acPt2dArrayBase, _
                                                      (nCount * dAng) + dAngFromX, _
                                                      dDist)

                Dim acVec2d As Vector2d = acPtObjBase.GetVectorTo(acPt2dTo)
                Dim acVec3d As Vector3d = New Vector3d(acVec2d.X, acVec2d.Y, 0)
                acEntClone.TransformBy(Matrix3d.Displacement(acVec3d))

                '' The following code demonstrates how to rotate each object like
                '' the ARRAY command does.
                'acExts = acEntClone.Bounds.GetValueOrDefault()
                'acPtObjBase = New Point2d(acExts.MinPoint.X, _
                '                          acExts.MaxPoint.Y)
                '
                '' Rotate the cloned entity and around its upper-left extents point
                'Dim curUCSMatrix As Matrix3d = acDoc.Editor.CurrentUserCoordinateSystem
                'Dim curUCS As CoordinateSystem3d = curUCSMatrix.CoordinateSystem3d
                'acEntClone.TransformBy(Matrix3d.Rotation(nCount * dAng, _
                '                                         curUCS.Zaxis, _
                '                                         New Point3d(acPtObjBase.X, _
                '                                                     acPtObjBase.Y, 0)))

                acBlkTblRec.AppendEntity(acEntClone)
                acTrans.AddNewlyCreatedDBObject(acEntClone, True)

                nCount = nCount + 1
            End While
        End Using

        '' Save the new objects to the database
        acTrans.Commit()
    End Using
End Sub

C#

using Autodesk.AutoCAD.Runtime;
using Autodesk.AutoCAD.ApplicationServices;
using Autodesk.AutoCAD.DatabaseServices;
using Autodesk.AutoCAD.Geometry;
 
static Point2d PolarPoints(Point2d pPt, double dAng, double dDist)
{
  return new Point2d(pPt.X + dDist * Math.Cos(dAng),
                     pPt.Y + dDist * Math.Sin(dAng));
}
 
[CommandMethod("PolarArrayObject")]
public static void PolarArrayObject()
{
    // Get the current document and database
    Document acDoc = Application.DocumentManager.MdiActiveDocument;
    Database acCurDb = acDoc.Database;

    // Start a transaction
    using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
    {
        // Open the Block table record for read
        BlockTable acBlkTbl;
        acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId,
                                        OpenMode.ForRead) as BlockTable;

        // Open the Block table record Model space for write
        BlockTableRecord acBlkTblRec;
        acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.ModelSpace],
                                        OpenMode.ForWrite) as BlockTableRecord;

        // Create a circle that is at 2,2 with a radius of 1
        using (Circle acCirc = new Circle())
        {
            acCirc.Center = new Point3d(2, 2, 0);
            acCirc.Radius = 1;

            // Add the new object to the block table record and the transaction
            acBlkTblRec.AppendEntity(acCirc);
            acTrans.AddNewlyCreatedDBObject(acCirc, true);

            // Create a 4 object polar array that goes a 180
            int nCount = 1;

            // Set a value in radians for 60 degrees
            double dAng = 1.0472;

            // Use (4,4,0) as the base point for the array
            Point2d acPt2dArrayBase = new Point2d(4, 4);

            while (nCount < 4)
            {
                Entity acEntClone = acCirc.Clone() as Entity;

                Extents3d acExts;
                Point2d acPtObjBase;

                // Typically the upper-left corner of an object's extents is used
                // for the point on the object to be arrayed unless it is
                // an object like a circle.
                Circle acCircArrObj = acEntClone as Circle;

                if (acCircArrObj != null)
                {
                    acPtObjBase = new Point2d(acCircArrObj.Center.X,
                                                acCircArrObj.Center.Y);
                }
                else
                {
                    acExts = acEntClone.Bounds.GetValueOrDefault();
                    acPtObjBase = new Point2d(acExts.MinPoint.X,
                                                acExts.MaxPoint.Y);
                }

                double dDist = acPt2dArrayBase.GetDistanceTo(acPtObjBase);
                double dAngFromX = acPt2dArrayBase.GetVectorTo(acPtObjBase).Angle;

                Point2d acPt2dTo = PolarPoints(acPt2dArrayBase,
                                                (nCount * dAng) + dAngFromX,
                                                dDist);

                Vector2d acVec2d = acPtObjBase.GetVectorTo(acPt2dTo);
                Vector3d acVec3d = new Vector3d(acVec2d.X, acVec2d.Y, 0);
                acEntClone.TransformBy(Matrix3d.Displacement(acVec3d));

                /*
                // The following code demonstrates how to rotate each object like
                // the ARRAY command does.
                acExts = acEntClone.Bounds.GetValueOrDefault();
                acPtObjBase = new Point2d(acExts.MinPoint.X,
                                            acExts.MaxPoint.Y);
                
                // Rotate the cloned entity around its upper-left extents point
                Matrix3d curUCSMatrix = acDoc.Editor.CurrentUserCoordinateSystem;
                CoordinateSystem3d curUCS = curUCSMatrix.CoordinateSystem3d;
                acEntClone.TransformBy(Matrix3d.Rotation(nCount * dAng,
                                                            curUCS.Zaxis,
                                                            new Point3d(acPtObjBase.X,
                                                                        acPtObjBase.Y, 0)));
                */

                acBlkTblRec.AppendEntity(acEntClone);
                acTrans.AddNewlyCreatedDBObject(acEntClone, true);

                nCount = nCount + 1;
            }
        }

        // Save the new objects to the database
        acTrans.Commit();
    }
}

VBA/ActiveX コード リファレンス

Sub PolarArrayObject()
    ' Create the circle
    Dim circleObj As AcadCircle
    Dim center(0 To 2) As Double
    Dim radius As Double
    center(0) = 2#: center(1) = 2#: center(2) = 0#
    radius = 1
    Set circleObj = ThisDrawing.ModelSpace. _
                                  AddCircle(center, radius)
    ZoomAll
 
    ' Define the polar array
    Dim noOfObjects As Integer
    Dim angleToFill As Double
    Dim basePnt(0 To 2) As Double
    noOfObjects = 4
    angleToFill = 3.14          ' 180 degrees
    basePnt(0) = 4#: basePnt(1) = 4#: basePnt(2) = 0#
 
    ' The following example will create 4 copies
    ' of an object by rotating and copying it about
    ' the point (4,4,0).
    Dim retObj As Variant
    retObj = circleObj.ArrayPolar _
                         (noOfObjects, angleToFill, basePnt)
 
    ZoomAll
End Sub