Floors, Ceilings and Foundations

Classes associated with floors, ceilings and foundations.

Floor, Ceiling and Foundation-related API items include:

Table 28: Floors, Ceilings and Foundations in the API

Object	Element Type	ElementType Type	Element Creation	Other
Floor	Floor	FloorType	NewFloor()/NewSlab()	FloorType.IsFoundationSlab = false
Slab	Floor	FloorType	NewSlab()	FloorType.IsFoundationSlab = false
Ceiling	Ceiling	CeilingType	No	Category = OST_Ceilings
Wall Foundation	WallFoundation	WallFoundationType	No	Category = OST_StructuralFoundation
Isolated Foundation	FamilyInstance	FamilySymbol	NewFamilyInstance()	Category = OST_StructuralFoundation
Foundation Slab	Floor	FloorType	NewFloor()	Category = OST_StructuralFoundation FloorType.IsFoundationSlab = true

Note: Floor and Ceiling derive from the class CeilingAndFloor.

The following rules apply to Floor:

Elements created from the Foundation Design bar have the same category, OST_StructuralFoundation, but correspond to different Classes.
The FloorType IsFoundationSlab property sets the FloorType category to OST_StructuralFoundation or not.

When you retrieve FloorType to create a Floor or Foundation Slab with NewFloor, use the following methods:

Figure 35: Create foundation and floor/slab

Currently, the API does not provide access to the Floor Slope Arrow in the Floor class. However, in Revit Structure, you can create a sloped slab with NewSlab():

Code Region 11-1: NewSlab()

public Floor NewSlab(CurveArray profile, Level level, Line slopedArrow, double slope, 
bool isStructural);

The Slope Arrow is created using the slopedArrow parameter.

Figure 36: slopedArrow parameter in NewSlab

The unit for the slope parameter in NewSlab() is rise/run.

The Floor.FloorType property is an alternative to using the Floor.GetTypeId() method. For more information about structure-related members such as the GetSpanDirectionSymbolIds() method and the SpanDirectionAngle property, refer to the Revit Structure chapter.

When editing an Isolated Foundation in Revit, you can perform the following actions:

You can pick a host, such as a floor. However, the FamilyInstance object Host property always returns null.
When deleting the host floor, the Foundation is not deleted with it.
The Foundation host is available from the Host (INSTANCE_FREE_HOST_PARAM) parameter.
Use another related Offset (INSTANCE_FREE_HOST_OFFSET_PARAM) parameter to control the foundation offset from the host Element.

Figure 37: Pick Host for FoundationSlab (FamilyInstance)

Wall foundations are represented by the WallFoundation class in the API. The API provides limited access to both WallFoundation and WallFoundationType except when using the GetAnalyticalModel() method (refer to AnalyticalModel in the Revit Structure section). For example, the attached wall is not available in Revit Architecture. In Revit Structure, the relationship between the Wall class and the WallFoundation class is shown using the GetAnalyticalModelSupports() method in the AnalyticalModel class. For more details, refer to AnalyticalModelSupport in the Revit Structure section.

Figure 38: Wall Foundation

Modifying Slabs

You can modify the form of slab-based elements using the SlabShapeEditor class. This class allows you to:

Manipulate one or more of the points or edges on a selected slab-based element
Add points on the element to change the element's geometry
Add linear edges and split the existing face of a slab into smaller sub-regions
Remove the shape modifier and reset the element geometry back to the unmodified shape.

Here's an example of reverting a selected modified floor back to its original shape:

Code Region 11-2: Reverting a slab's shape

private void ResetSlabShapes(Autodesk.Revit.DB.Document document)
{
        UIDocument uidoc = new UIDocument(document);
        Selection choices = uidoc.Selection;
        ElementSet collection = choices.Elements;
        foreach (Autodesk.Revit.DB.Element elem in collection)
        {
                Floor floor = elem as Floor;
                if (floor != null)
                {
                        SlabShapeEditor slabShapeEditor = floor.SlabShapeEditor;
                        slabShapeEditor.ResetSlabShape();
                }
        }
}

For more detailed examples of using the SlabShapeEditor and related classes, see the SlabShapeEditing sample application included in the Revit SDK.