- Enable surface-splitting in Simulation Mechanical prior to opening the CAD model. This option is off by default.
- Use the CAD model, Circuit Board.SimStudio, you created in the previous tutorial, or use the completed CAD model, Circuit Board.igs, provided within your tutorial models folder.
- Transfer the Circuit Board CAD model you built from SimStudio Tools into Simulation Mechanical.
- Alternatively, if you did not complete the tutorial, Create Circuit Board CAD Model in Autodesk SimStudio Tools, or, if you chose not to install the SimStudio Tools application, then open the provided CAD model, Circuit Board.igs, in Simulation Mechanical.
- Return the surface-splitting option to its default setting.
- Solid mesh the model using an absolute mesh size of 0.15 inch.
Next