Create the Horizontal Part

We will construct the horizontal part as Part 2.

1. Click Draw Draw Rectangle.
   1. Type 2 in the Part field.
   2. Type 2 in the Y: field, type 4.5 in the Z: field, and press Enter to specify the point (0, 2, 4.5) as the first corner.
   3. Type 17 in the Y: field, type 7.5 in the Z: field, and press Enter to specify the point (0, 17, 7.5) as the opposite corner.
   4. Click Apply.
   5. Press Esc to exit the command.
2. Click  View Navigate Enclose (Fit All).
3. Click Draw Draw Circle Center and Radius.
   1. Type 15 in the Y: field, type 6 in the Z: field, and press Enter to specify the point (0, 15, 6) as the center of the circle.
   2. Type 15 in the Y: field, type 6.5 in the Z: field, and press Enter to specify (0, 15, 6.5) as a point on the circle.
   3. Click Apply.
   4. Press Esc to exit the command.   

   The model should display as shown in the following image.  

    

Next