- This tutorial uses the model created in the Vise Grips CAD Model tutorial. If that tutorial was not completed, use Meshed Vise Grips.ach in your tutorial models folder.
- The vise grip parts and the joint are made of Steel (ASTM-A36).
- The truss elements for the joint have a cross-sectional area of 1 in
2
.
- Apply fixed boundary conditions to the flat surfaces of the grips.
- Apply a downward 20 lbf force at the end of the upper handle of the vise grips.
- Apply an upward 20 lbf force at the end of the lower handle of the vise grips.
Next