To Work With Resequencing Terminal Numbers

Terminal Renumber (Pick Mode)

1. Enter AETERMRENUMPICK at the command prompt.
2. Enter the first terminal number to use and press Enter.
3. Select each terminal in order on the screen.

   The terminal number updates automatically, incrementing with each pick.

4. Right-click to exit the command.

Terminal Renumber (Project-Wide)

1. Enter AETERMRENUM at the command prompt.

   The Project-wide Schematic Terminal Resequence dialog box displays.

2. Enter the terminal strip tag ID and the starting terminal number.
3. If you want to refine the search, enter an installation or location code to use when searching the drawings.

   Click Project or Drawing to select an installation or location code from existing terminal numbers.

4. Click OK.
5. In the Select Drawings to Process dialog box, select the drawings to search through, and click OK.

Note: These tools do not renumber panel terminals. Use the Terminal Strip editor to resequence a terminal strip that contains panel terminals.