Resequences the terminal numbers across one or many drawings.
Command entry:
AETERMRENUM
Note: This tool does not resequence terminals that carry a wire number as the terminal number.
|
Tag-ID |
Specifies the terminal strip ID to use when searching each drawing for terminals. Only terminals with this ID are updated. |
|
Include Installation/Location in terminal strip Tag-ID match |
Updates a terminal only if it matches the Terminal Strip ID, Location, and Installation values specified. |
|
Installation code |
Refines the search by including an installation value. |
|
Location code |
Refines the search by including a location value. |
|
Starting terminal number |
Specifies the number to begin the terminal strip with; you can use alphanumeric values. The default value is 1. |
After you click OK, select the drawings to process from the active project.
Note: This tool does not renumber panel terminals. Use the Terminal Strip editor to resequence a terminal strip that contains panel terminals.