Use the elements in the dialog box to modify the parameters of a right angle course.
- Point 1
-
Base line for calculations (offset = 0.00).
Use the Graphic icon
to select another base line. - Point 2
-
Use this button to add definition rows for the offset lines. You can specify the distance to the base line by mouse-click.
- Easting/ Northing
-
Coordinates of existing points. Use the Graphic icon
to select a point in the drawing. Use the Delete icon to delete the coordinates of a point. - Distance
-
Measured value.
- Calculated Distance/Delta
-
Distance calculated from existing coordinates. The measured sections are adjusted to the existing points. Delta shows the difference between measured and calculated values, so you can decide, whether the object can be described with a right angle course.
- Point 3/ Point <nr>
-
The right angle course can consist of an arbitrary number of measured sections and existing points. For sections only the distance column is filled out.
- Add Sections
-
Use the Add Sections button to enter the measured values. The focus changes to the map and you can either specify the location with a click or type the value.