Value > MAXWrapper > Node > GeometryClass > OilTank |
The height along the central axis.
Negative values create the oiltank below the construction plane.
Sets the height of the convex caps.
The minimum value is 2.5% of the Radius setting.
The maximum value is the Radius setting, unless the absolute value of the Height setting is less than the double Radius setting, in which case cap height cannot exceed half of the absolute value of the Height setting.
When greater than 0, creates a bevel at the edge of the caps.
Sets the number of sides around the oiltank.
To create a smoothly rounded object, use a higher number of sides and turn Smooth on.
To create an oiltank with flat sides, use a lower number of sides and turn Smooth off.
Sets the number of divisions along the oiltank's major axis.
Sets the starting angle (on the local Z-axis) for slicing.
Sets the angle (on the local Z-axis) to slice to.
1- enable mapping coordinates,
0 - disable mapping coordinates.
Enables/disables the real-world map size option.
Available in 3ds Max 8 and higher.