Microcellular injection molding analysis results

This help topic specifies the results generated for a Microcellular Injection Molding analysis on a thermoplastic material.

Text based results

The following table lists the text results that are created for each Microcellular Injection Molding analysis.

Results
Microcellular molding analysis log
Results Summary
Analysis check

Graphical results

The following table lists the graphical results that are created for a Microcellular Injection Molding analysis and indicates whether each result is supported for the following mesh types:
  • Midplane
  • Dual Domain
  • 3D

For more information about a result, including how to interpret the display, click on the result name.

Result Available for analysis technology
Bubble pressure result Midplane Dual Domain
Bubble pressure final result Midplane Dual Domain
Bubble radius result Midplane Dual Domain
Bubble radius final result Midplane Dual Domain
Bubble number density result Midplane Dual Domain
Bubble number density final result Midplane Dual Domain
Linear thermal expansion coefficient (Microcellular) result Midplane Dual Domain
Poisson's ratio (Microcellular) result Midplane Dual Domain
Shear modulus (Microcellular) result Midplane Dual Domain
Tensile modulus (Microcellular) result Midplane Dual Domain
Note:
  • In order to distinguish it from mold closing, the mold opening for Press Displacement and Press speed results displays as a negative number.
  • Some results such as fill time, pressure, and temperature display on the deformed mesh.

    To change the display, click (Results tab > Properties panel > Plot Properties) and deselect Display on deformed mesh .

Topics in this section
Parent topic: Results