Apply the Forces

1. Press Esc to clear the selection set.
2. Click Setup Loads Loads from File. You will have to expand the Loads panel to see this command.
   1. Click the ellipsis button (...) in the first row of the Results File column.
      1. Select the Electrostatic Reaction Forces File (*.efr) option in the Files of type drop-down list.
      2. Navigate to the subfolder, …\Radial Comb.ds_data\1. This folder is where the files for Design Scenario 1 are stored. It is a subfolder of the model storage location.
      3. Select the file ds.efr.
      4. Click Open.
   2. Click OK.

Next