Sections in this topic:
 Supported Data
 
   
   
	 Flame allows you to import multi-track compositions from Apple Final Cut Pro (FCP) or from Adobe Premiere. 
  
 
  The following tables describe the data that is output from FCP and input into 
	 Flame. Sequences from Adobe Premiere should behave the same.
  
 
  General Data
 
	  
	 FCP composition(s) data maps to 
		Flame timeline data. 
	 
 
	 
| Final Cut Pro | Flame | 
|---|
| Name | Name | 
| Frame rate | Frame rate | 
| Duration | Duration | 
Editorial Data
 
	  
	 FCP Source media data and Record side data maps to Autodesk clip data. 
	 
 
	 
| Final Cut Pro | Flame | 
|---|
| Source media data: Tape name 
					 Source TC in/out 
					 Edge code 
					 Log notes 
					 Aspect ratio 
					 Comments 
					 
 | Source clips: Tape name 
					 Source TC in/out 
					 Keycode 
					 Elements comments 
					 Aspect ratio 
					 Elements Comments 
					 
 | 
| Record side data: In/Out 
					 Transition type 
					 Number of video tracks 
					 Number of audio tracks 
					 Marker 
					 In/Out marker 
					 
 | Record clip: Segment 
					 Cut/Dissolve/Wipe/Action 
					 Video tracks 
					 Audio tracks 
					 Track marks 
					 In/Out marks 
					 
 | 
Effect Data
 
	  
	 FCP transitions map to 
		Flame transitions, while FCP Filter effects and FX Script data map to 
		Flame Timeline FX. 
	 
 
	 
| Final Cut Pro | Flame | 
|---|
| Filter effects | Timeline FX | 
| Transitions | Transitions | 
 Animation Interpolation
 
   
  FCP animation interpolation maps to Autodesk interpolation. 
  
 
  
| Final Cut Pro | Flame | 
|---|
| Corner | Linear | 
| Smooth | Hermite | 
Motion
 
   
  The following table describes how motion from FCP is mapped to 
	 Flame Action Timeline FX parameters. 
  
 
  
| Final Cut Pro | Flame | 
|---|
| Basic Motion | Action (Axis) | 
| Crop | Action (Crop) | 
| Distort | Action (Surface) | 
| Opacity | Action (Surface) (partially supported) | 
| Drop Shadow | Action (Shadow) | 
| Motion Blur | Not supported | 
| Time Remap | Time Warp (see below) | 
About Time Remap to Timewarp
 
	  
	 To make sure the conform is accurate with the creative editorial decisions from Final Cut Pro 7, the conformed timewarp speed value seen in 
		Flame Time Warp editor can be slightly different from the one seen in FCP7. But the actual Time Warp Timeline FX will be visually similar to the expected result, and be frame and keyframe accurate. There are exceptions: 
	 
 
	 - Frame blending used with this effect is not translated. 
		
- Negative constant timewarp speeds are not applied to the audio tracks of the segment being timewarped. 
		
- Variable time warps are not applied to the audio tracks of the segment being timewarped. 
		
Video Filters
 
   
  Blur
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Gaussian Blur | Action (Surface + Axis) (partially supported) | 
| Radial Blur | Not supported | 
| Wind Blur | Not supported | 
| Zoom Blur | Not supported | 
Border
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Basic Border | Resize | 
| Bevel | Not supported | 
Channel
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Arithmetic | Not supported | 
| Channel Blur | Not supported | 
| Channel Offset | Not supported | 
| Colour Offset | CC (partially supported) | 
| Compound Arithmetic | Not supported | 
| Invert | CC (partially supported) | 
Colour Correction
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Broadcast Safe | Not supported | 
| Colour Correction | Not supported; replaced by CC | 
| Colour Correction 3-way | Not supported; replaced by CC | 
| Desaturate Highlights | Not supported | 
| Desaturate Lows | Not supported | 
| RGB Balance | Not supported; replaced by CC | 
Distort
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Bumpmap | Not supported | 
| Cylinder | Not supported | 
| Displace | Not supported | 
| Fisheye | Not supported | 
| Pond Ripple | Not supported | 
| Ripple | Not supported | 
| Wave | Not supported | 
| Whirlpool | Not supported | 
Image Control
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Brightness & Contrast (Bezier) | Not supported; replaced by CW | 
| Colour Balance | Not supported; replaced by CC | 
| Desaturate | CC | 
| Gamma Correction | Not supported; replaced by CW | 
| Levels | Not supported | 
| Proc Amp | Not supported; replaced by CC | 
| Sepia | Not supported; replaced by CC | 
| Tint | Not supported | 
Key
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Blue and Green screen | Not supported | 
| Chroma Keyer | Not supported; replaced by Action | 
| Colour Smoothing 4:1:1 | Not supported | 
| Colour Smoothing 4:2:2 | Not supported | 
| Colour Key | Not supported; replaced by Action | 
| Difference Matte | Not supported | 
| Luma Key | Not supported | 
| Spill Suppressor - Blue | Not supported; replaced by Action | 
| Spill Suppressor - Green | Not supported; replaced by Action | 
Matte
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| 8-Point Garbage Mask | Not supported; replaced by Action | 
| Extract | Not supported | 
| 4-Point Garbage Mask | Not supported; replaced by Action | 
| Image Mask | Not supported; replaced by Action | 
| Mask Feather | Not supported | 
| Mask Shape | Action (partially supported) | 
| Matte Choker | Not supported; replaced by Action | 
| Soft Edges | Not supported; replaced by Action | 
| Widescreen | Action (partially supported) | 
Perspective
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Basic 3D | Action (Axis) (partially supported) | 
| Curl | Not supported | 
| Flop | Action (Axis) | 
| Mirror | Not supported | 
| Rotate | Action (Axis) | 
QuickTime
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Gaussian Blur | Action (Axis) | 
| Brightness/Contrast | Not supported; replaced by CC | 
| Colour Style | Not supported | 
| Colour Tint | CC (partially supported) | 
| Colour Sync | Not supported | 
| Edge Detection | Not supported | 
| Emboss | Not supported | 
| General Convolution | Not supported | 
| HSL Balance | Not supported; replaced by CC | 
| Lens Flare | Not supported | 
| RGB Balance | Not supported; replaced by CC | 
| Sharpen | Not supported | 
Sharpen
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Sharpen | Not supported | 
| Unsharp Mask | Not supported | 
Stylize
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Anti-Alias | Not supported | 
| Diffuse | Not supported | 
| Emboss | Not supported | 
| Find Edges | Not supported | 
| Posterize | Not supported | 
| Replicate | Not supported | 
| Solarize | Not supported | 
Video
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Blink | Action | 
| De-Interlace | Resize (partially supported) | 
| Flicker Filter | Not supported | 
| Image Stabilizer | Not supported; replaced by Action | 
| Stop Motion Blur | Not supported | 
| Strobe | Time Warp | 
| Timecode Generator | Not supported | 
| Timecode Reader | Not supported | 
| Viewfinder | Not supported | 
 Video Generators
 
   
  The following tables describe generated effects that are translated into equivalent effects in 
	 Flame. 
  
 
  Once imported into 
	 Flame, effects created with the FCP video generator use the project's default resolution, regardless of their original resolution in FCP. This matches the behaviour of FCP: XML files with these effects that are reimported into FCP projects with different resolutions similarly inherit the project's resolution. 
  
 
  Video Generator
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Bars and Tone HD108060i | Colour Source SMPTE Bars (partially supported) | 
| Bars and Tone HD720p60 | Colour Source SMPTE Bars (partially supported) | 
| Bars and Tone (NTSC) | Colour Source SMPTE Bars (partially supported) | 
| Bars and Tone (PAL) | Colour Source SMPTE Bars (partially supported) | 
| Slug | Black colour Source SMPTE Bars (partially supported) | 
Matte
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Colour | Colour Source (Fill Colour): R = 0-255 
					 G = 0-255 
					 B = 0-255 
					 
 | 
Others
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| More Bars and Signals | Not supported | 
Render
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Custom Gradient | Not supported | 
| Gradient | Not supported | 
| Highlight | Not supported | 
| Noise | Colour Source Noise | 
| Particle Noise | Not supported | 
Shapes
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Circle | Not supported | 
| Oval | Not supported | 
| Rectangle | Not supported | 
| Square | Not supported | 
Text
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Crawl | Text (partially supported) | 
| Lower 3rd | Text (partially supported) | 
| Outline Text | Text (partially supported) | 
| Scrolling Text | Text (partially supported) | 
| Text | Text (partially supported) | 
| Typewriter | Not supported; replaced by Colour Source | 
Audio
 
   
  Some FCP audio elements are mapped to 
	 Flame equivalents. Audio keyframes are not supported. 
  
 
  Audio Transitions
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Cross Fade (0dB) | Audio fade (partially supported) | 
| Cross Fade (+3dB) | Not supported; replaced by Audio Fade | 
Audio Controls
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| Stereo | Audio Gain (partially supported) | 
Apple
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| AuBandPass | Not supported | 
| AuDelay | Not supported | 
| AuDynamicProcessor | Not supported | 
| AuGraphicsEQ | Not supported | 
| AuHighShelfFilter | Not supported | 
| AuHighPass | Not supported | 
| AuLowPass | Not supported | 
| AuLowShelfFilter | Not supported | 
| AuMultibandCompress | Not supported | 
| AuParametricEQ | Not supported | 
| AuPeakLimiter | Not supported | 
Final Cut Pro HD
 
	  
	 
| Final Cut Pro | Flame | 
|---|
| 3 Band Equalizer | Not supported | 
| Band Pass Filter | Not supported | 
| Compressor/Limiter | Not supported | 
| DC Notch | Not supported | 
| Echo | Not supported | 
| Expander/Noise Gate | Not supported | 
| High Pass Filter | Not supported | 
| High Shelf Filter | Not supported | 
| Hum Remover | Not supported | 
| Low Pass Filter | Not supported | 
| Low Shelf Filter | Not supported | 
| Notch Filter | Not supported | 
| Parametric Equalizer | Not supported | 
| Reverberation | Not supported | 
| Vocal DeEsser | Not supported | 
| Vocal DePopper | Not supported | 
Composite Modes
 
   
  Some FCP composite modes are mapped to 
	 Flame Action surface blend modes. 
  
 
  
| Final Cut Pro | Flame | 
|---|
| Modify | Add = Add (partially supported) 
				  Subtract = Subtract 
				  Difference = Negate 
				  Multiply = Multiply 
				  Screen = Screen 
				  Overlay = not supported 
				  Hard Light = not supported 
				  Soft Light = not supported 
				  Darken = Min 
				  Lighten = Max 
				  Travel Matte - Alpha = not supported 
				  Travel Matte - Luma = not supported 
				  Normal = not supported 
				  
 |