ExtLine2EndPoint Property (ActiveX)

Specifies the endpoint of the second extension line.

Supported platforms: Windows only

Signature

VBA:

object.ExtLine2EndPoint

object

Type: Dim3PointAngular, DimAngular

The objects this property applies to.

Property Value

Read-only: No

Type: Variant (three-element array of doubles)

A 3D coordinate representing the endpoint of the second extension line.

Remarks

The ExtLine1EndPoint and ExtLine2EndPoint properties contain the endpoints of the extension lines. If no extension lines exist for a given dimension, these points will equal ExtLine1StartPoint and ExtLine2StartPoint.

Examples

VBA:

Sub Example_ExtLine2EndPoint()
    ' This example creates an angular dimension. It then changes
    ' the location of the ExtLine2EndPoint.
    
    Dim dimObj As AcadDimAngular
    Dim angVert(0 To 2) As Double
    Dim FirstPoint(0 To 2) As Double
    Dim SecondPoint(0 To 2) As Double
    Dim TextPoint(0 To 2) As Double
    
    ' Define the dimension
    angVert(0) = 0#: angVert(1) = 5#: angVert(2) = 0#
    FirstPoint(0) = 1#: FirstPoint(1) = 7#: FirstPoint(2) = 0#
    SecondPoint(0) = 1#: SecondPoint(1) = 3#: SecondPoint(2) = 0#
    TextPoint(0) = 3#: TextPoint(1) = 5#: TextPoint(2) = 0#
    
    ' Create the angular dimension in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAngular(angVert, FirstPoint, SecondPoint, TextPoint)
    ZoomAll
    MsgBox "The current value of ExtLine2EndPoint is " & dimObj.ExtLine2EndPoint(0) & ", " & dimObj.ExtLine2EndPoint(1) & ", " & dimObj.ExtLine2EndPoint(2), vbInformation, "ExtLine2EndPoint Example"
    
    ' Change the endpoint of the second extension line
    SecondPoint(0) = 1: SecondPoint(1) = 4: SecondPoint(2) = 0
    dimObj.ExtLine2EndPoint = SecondPoint
    dimObj.Update
    
    ' Return the endpoint of the second extension line
    ' Note that the return value is a Variant
    Dim retPnt As Variant
    retPnt = dimObj.ExtLine2EndPoint
    MsgBox "The new value of ExtLine2EndPoint is " & dimObj.ExtLine2EndPoint(0) & ", " & dimObj.ExtLine2EndPoint(1) & ", " & dimObj.ExtLine2EndPoint(2), vbInformation, "ExtLine2EndPoint Example"
End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_ExtLine2EndPoint()
    ;; This example creates an angular dimension. It then changes
    ;; the location of the ExtLine2EndPoint.
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the dimension
    (setq AngleVertex (vlax-3d-point 0 5 0)
          FirstPoint (vlax-3d-point 1 7 0)
          SecondPoint (vlax-3d-point 1 3 0)
          TextPoint (vlax-3d-point 3 5 0))

    ;; Create the angular dimension in model space
    (setq modelSpace (vla-get-ModelSpace doc))  
    (setq dimObj (vla-AddDimAngular modelSpace AngleVertex FirstPoint SecondPoint TextPoint))
    (vla-ZoomAll acadObj)

    (setq extLineEndPoint (vlax-safearray->list (vlax-variant-value (vla-get-ExtLine2EndPoint dimObj))))
    (alert (strcat "The current value of ExtLine2EndPoint is " (rtos (nth 0 extLineEndPoint) 2) ", "
		                                               (rtos (nth 1 extLineEndPoint) 2) ", "
		                                               (rtos (nth 2 extLineEndPoint) 2)))
    
    ;; Change the endpoint of the second extension line
    (setq SecondPoint (vlax-3d-point 1 4 0))
    (vla-put-ExtLine2EndPoint dimObj SecondPoint)
    (vla-Update dimObj)
    
    ;; Return the endpoint of the second extension line
    ;; Note that the return value is a Variant
    (setq retPnt (vlax-safearray->list (vlax-variant-value (vla-get-ExtLine2EndPoint dimObj))))
    (alert (strcat "The new value of ExtLine2EndPoint is " (rtos (nth 0 retPnt) 2) ", "
		                                           (rtos (nth 1 retPnt) 2) ", "
		                                           (rtos (nth 2 retPnt) 2)))
)