Use this dialog box to assign profiles to their associated alignments when you are using the Civil Engineering Data Translator to translate a GPK file to a DWG file. Profiles that you do not assign to an alignment are not imported into the resulting DWG file.
After you have completed assigning the profiles, click
OK to proceed with the second stage of translating the GPK file.
-
Unassigned Profiles
- Lists the unassigned profiles that are being imported from the GPK file. To assign a profile to an alignment, select the check box next to an unassigned profile, select the check box in the
Parent Alignments list for the alignment to which it should be assigned, and then click
Add>>.
-
Parent Alignments
- Lists the alignments that are being imported from the GPK file. Select the check box next to an alignment to specify it as the destination for a selected profile in the
Unassigned Profiles list and then click
Add>>.
-
Add >>
- Assigns selected profiles in the
Unassigned Profiles list to a selected alignment in the
Parent Alignments list.
-
Remove <<
- Removes the association of an assigned profile with an alignment. Select the check box next to an assigned profile in the
Parent Alignments list and click
Remove <<. The profile is moved back to the
Unassigned Profiles list.
-
Reset
- Resets all assignments. All profiles that have been assigned to alignments in the
Parent Alignments list are moved back to the
Unassigned Profiles list.