FAQ: How do I Match Parts Between Autodesk Civil 3D and Storm and Sanitary Analysis

Part matching when round-tripping pipe networks with Autodesk Civil 3D is accomplished with the use of import and export settings and a part mapping XML file.

This topic contains the following sections:

Part Matching Introduction

Issues When Transferring Pipe Network Data between AutoCAD Civil 3D 2011 and Storm and Sanitary Analysis

Part Matching Solution Overview

Transferring Data

Changes to Part Types in the STM file

Storm Sewers (STM) File Properties

The XML Part Mapping Files

Customizing an XML Part Mapping File

Import and Export Part Matching Example

Part Matching Introduction

This topic addresses workflows and methods for integrating Autodesk Civil 3D with Autodesk analysis applications, mainly Autodesk Storm and Sanitary Analysis. The main focus is on importing Autodesk Civil 3D pipe network data into Storm and Sanitary Analysis and importing it back again into Autodesk Civil 3D. Some of this information applies to integration with Hydraflow Storm Sewers as well.

Autodesk Storm and Sanitary Analysis enables you to model stormwater networks using various hydrology and hydraulic computational methods; it can also be used to model sanitary sewer networks. This topic describes the features in the product that enhance its integration with Autodesk Civil 3D.

Part Matching Workflow

There are a variety of ways to perform stormwater analysis. The following workflow uses the stronger abilities of each product to best perform a design.

Creating pipe and structure elements in Autodesk Civil 3D instead of in Storm and Sanitary Analysis can take advantage of other model elements in a way that Storm and Sanitary Analysis cannot. However, true hydrology and hydraulic properties are more appropriately entered in Storm and Sanitary Analysis.

The workflow addressed in this topic outlines the following process:

  1. Creating pipe networks in Autodesk Civil 3D to be analyzed in Autodesk Storm and Sanitary Analysis.
  2. Making changes to the network in the analysis application.
  3. Moving the data back into Autodesk Civil 3D.

This process enables you to make best use of each product and perform round-tripping for multiple design iterations. In the process of moving data between applications, you will not want to lose data unnecessarily along the way, and this topic discusses the settings and features that are available that preserve your pipe data definitions during round-tripping.

Issues When Transferring Pipe Network Data between AutoCAD Civil 3D 2011 and Storm and Sanitary Analysis

Part Matching Solution Overview

Transferring Data

A command, Edit in Storm and Sanitary Analysis, has been added to Autodesk Civil 3D which simplifies pipe network data transfer.

This command can be found on the Design panel of the Analyze tab on the ribbon, and also on the Pipe Network contextual ribbon.

Edit in Storm and Sanitary Analysis prompts you to select a pipe network and then the command transparently exports the data and current drawing file into Storm and Sanitary Analysis. This command uses the data transfer files and the Part Matching Defaults export settings.

This command creates a temporary Hydraflow Storm Sewers STM file to transfer the data.

Note: Alternatively, you could use the Export to Storm Sewers command from within Autodesk Civil 3D to create a Storm Sewers STM file. That STM file and the Autodesk Civil 3D DWG file could both be manually imported into Storm and Sanitary Analysis with the same results as the Edit in Storm and Sanitary Analysis command.

To bring data back into Autodesk Civil 3D you can use the File Export Hydraflow Storm Sewers File command from Storm and Sanitary Analysis, and then import that file into Autodesk Civil 3D. This process enables an existing pipe network to be updated with the data from Storm and Sanitary Analysis.

Autodesk Civil 3D uses the Storm Sewers Migration Defaults and either the Part ID or the Import Part Matchup Settings when matching parts, as discussed below in Autodesk Civil 3D Settings for Controlling Part Matching.

Autodesk Civil 3D Properties for Specifying Inlet Type

Autodesk Civil 3D pipe network structures have been enhanced to contain an Inlet Location property. The new Inlet Location property is available on the Part Properties tab of the Structure Properties dialog box, under Hydraulic Properties.

The values for this property are On Sag, On Grade or <none>.

This property is written out to STM files from Autodesk Civil 3D for use in Storm and Sanitary Analysis and Storm Sewers.

Autodesk Civil 3D Settings for Controlling Part Matching

Two new settings provide Autodesk Civil 3D additional control when importing from a Storm Sewers (STM) file. These settings are found under Storm Sewers Migration Defaults in the Pipe Network Feature Settings.

Allow Part Family Swapping

The new Allow Part Family Swapping setting provides the ability to control the behavior of swapping part families when importing a Storm Sewers (STM) file. The default for this setting is Yes to match the behavior of AutoCAD Civil 3D 2011 and prior versions.

Previous versions of Autodesk Civil 3D would automatically swap part families based on part matching with no ability to turn off this behavior.

With the setting set to No, Autodesk Civil 3D will only use dimensional properties to swap part sizes within the same part family.

With part family swapping set to Yes you may find that some parts in a pipe network change to different Part Families, and previously-assigned optional properties and labels are removed. This would occur when the combination of the part type in the STM file and the associated Part Matching Defaults match to a different part family than what is currently being used in the Autodesk Civil 3D drawing.

For example, this could occur if multiple circular pipes are imported from an STM file into an Autodesk Civil 3D pipe network where there is a mix of concrete and PVC circular pipes. The Part Matching Defaults can only assign one part family for circular pipe, so if circular pipe is matched to the Concrete part family, then all the PVC pipes in the network will be swapped to Concrete.

The default setting of Yes maintains the behavior of prior Autodesk Civil 3D versions (as described in the above example) by swapping part families of each individual part if the part family in the STM file being imported is different from the part's family in the Autodesk Civil 3D drawing.

Changing the setting to No prevents all part family swapping during STM file import. However, part sizes may be changed within the family based on dimensional values that are imported:

  • For pipes, part size swapping is based on diameter (or width and length for non-circular pipes) within the same part family.
  • For structures, part size swapping is based on body dimensions and frame dimensions.

Use Imported Part ID for Part Family

The new Use Imported Part ID for Part Family setting controls the mapping of Part Families based on the Part IDs in the STM file. The default for this setting is No to match the behavior of previous versions of Autodesk Civil 3D.

If Allow Part Family Swapping (described above) is set to Yes, then the Use Imported Part ID for Part Family setting tells Autodesk Civil 3D whether or not to map to Part Families based on the Part IDs in the STM file for each imported part. If Allow Part Family Swapping is set to No, then the Use Imported Part ID for Part Family setting has no effect.

The behavior of Use Imported Part ID for Part Family is as follows:

  • A No value will maintain the behavior of AutoCAD Civil 3D 2011 and prior versions by using the Import settings in the Part Matching Defaults to determine the Part Family.
  • A Yes value will use the Part ID in the STM file to determine the Part Family to be used for matching. However, if a valid Part ID is not found in the part list used for migration (as specified in the part matching defaults), then that part will use the Import settings in the Part Matching Defaults.
Note: The Part ID (GUID) of each Pipe Network Part is exported during an export to STM from Autodesk Civil 3D, regardless of the Use Imported Part ID for Part Family setting. The Part ID (GUID) is found in the Part Family's XML file which is found in the Part Catalog. This GUID is unique for each Part Family and the same for all sizes within the same Part Family.

Data Transfer Files

There are two files used during the data transfer from Autodesk Civil 3D to Storm and Sanitary Analysis, and from Storm and Sanitary Analysis to Autodesk Civil 3D:

  • Storm Sewers file (STM) - specific to each project
  • Part mapping file (XML) - globally used file (not project specific)

The STM file is project specific and contains all the nodes and links of the pipe networks in the model. It contains information specific to each instance of the part in the project (for example, elevations, diameters, and data specific to the part's location in the model).

A temporary STM file is created transparently with the Edit in Storm and Sanitary Analysis (or Edit in Storm Sewers) command. Or you can use the Export to STM command and save the STM file to a defined location.

The part matching XML file is used by Storm and Sanitary Analysis to map Autodesk Civil 3D parts (using a Part ID) found in an STM file to a Storm and Sanitary Analysis element (Junction, Inlet, Conveyance Link, Storage, Channel, Orifice, Weir, and so on). The XML part mapping file is intended to be used globally on all projects so it would only contain data to define a specific cataloged part, and not data that would differ for different instances of the same part (for example, Inlet Location, road & gutter slopes).

Changes to Part Types in the STM file

In AutoCAD Civil 3D 2011 and prior versions, only the Hydraflow Storm Sewers part types were exported to the STM file. These included three Line Types (shapes for pipes) and nine Junction Types (for structures) that are configurable from the Storm Sewers Migration Defaults/Part Matching Defaults inside the AutoCAD Civil 3D Pipe Network Feature Settings.

A change was made in Autodesk Civil 3D so that the Part Families' Part ID and Part Description for each pipe and structure are exported to the STM file. This provides the ability to match more parts for analysis rather than being limited to a small number of available Hydraflow Storm Sewers parts.

Autodesk Civil 3D exports the Part ID and description for each pipe and structure to the STM file as follows:

Example uses of the new fields are shown below with new data displayed in bold:

Pipes:

"Line Type = ","Cir"

"Line Part ID = ","30921980-2D9B-493A-88C5-6D10AEA8B835"

"Line Part Description = ","AeccCircularConcretePipe_Imperial"

Structures:

"Junction Type = ",4

"Junction Part ID = ","112AAC17-CBCB-4B43-838A-2B38C17B3ABC"

"Junction Part Description = ","AeccStructTwoTierRectBase_Imperial"

Storm Sewers (STM) File Properties

Instance-specific data from a project file is exported to the Storm Sewers STM file. The following lists show the STM fields that are used by Autodesk Civil 3D and Storm and Sanitary Analysis to define parts and elements.

For Pipes / Lines / Links:

For Structures / Junctions / Nodes:

The above Line Type and Junction Type values are used for matching to and from Autodesk Civil 3D based upon the Part Matching Defaults settings.

The Part Matching Defaults settings are found in the Feature Settings for Pipe Networks under Storm Sewers Migration Defaults.

Most users find that they get the best results when the Export matchup settings are equivalent to the Import matchup settings. Otherwise, a different Part Family will be substituted upon import.

The Export tab as shown below enables you to select any of the available Storm Sewers Part Types (on the right) to match to each of the Autodesk Civil 3D Part Types found in the current Part Catalog. The Autodesk Civil 3D Part Types that are shown are updated based on changes made to the Part Catalog.

The Import tab enables you to select an Autodesk Civil 3D Part Family (on the right) to be used for each available Storm Sewers Part Type. The Storm Sewers Part Type is a fixed list. This mapping should be equivalent to the export mapping so that part families remain the same.

Most new structures in Storm and Sanitary Analysis will export as a rectangular shaped 4 foot by 4 foot structure in the STM file and may not match the same part types that were originally imported as circular structures (if Use Imported Part ID for Part Family is set to No). One possible practice would be to have rectangular Storm Sewers Parts and circular Storm Sewers Parts map to the same Autodesk Civil 3D Part Type, although if the setting are configured with that strategy, a one-to-one mapping between Storm Sewers Part Type and Autodesk Civil 3D Part Type will not be possible.

The matching of STM Part Type to Storm and Sanitary Analysis Part Type is hard-coded. The following table shows how Storm and Sanitary Analysis uses the values. Reading from left to right shows the STM part types, how they are imported into Storm and Sanitary Analysis, and then how those are exported back to the STM file:

STM Part Types Table

STM Part Type Exported from Autodesk Civil 3D Corresponding Storm and Sanitary Analysis Part Type STM Part Type Imported into Autodesk Civil 3D
Structures

The numerical values shown in parentheses in the first and last columns represent the numerical values found in the STM file.

Manhole (0) Junction Manhole (0)
Combination Inlet (3) Inlet - FHWA Combination Inlet Combination Inlet (3)
Curb Inlet (1) Inlet - FHWA Curb Inlet Curb Inlet (1)
Grate Inlet (2) Inlet - FHWA Grate (Rectangular) Grate Inlet (2)
Drop Grate (8) Inlet - Median & Ditch Inlet Drop Grate (8)
Drop Curb (7) Inlet - FHWA Curb Inlet Drop Curb (7)
Generic (4) Maximum Cutoff Inlet Generic (4)
Headwall (5) Junction (or Outfall if end of run) Manhole (0)
No Structure (6) Junction Manhole (0)
Outfall Outfall Outfall
none Inlet - FHWA Grate (Circular) Grate Inlet (2)
none Storage Node Manhole (0)
none Diversion Manhole (0)
Pipes
Circular pipe ("Cir") Conveyance Link - Circular Pipe Circular pipe ("Cir")
Box culvert ("Box") Conveyance Link - Rectangular Pipe Box culvert ("Box")
Elliptical pipe ("Ell") Conveyance Link - Elliptical Pipe Elliptical pipe ("Ell")

The XML Part Mapping Files

If you need to have more control over part mapping, you can set up an XML part mapping file.

When you use an XML part mapping file, the part mapping is done using the Part ID included in the STM file. The XML part mapping file creates a specific mapping between Autodesk Civil 3D and Storm and Sanitary Analysis parts based on Part ID, so specific matches can be made.

The XML part mapping file is editable and is intended to be used by advanced users to map Autodesk Civil 3D parts to specific Storm and Sanitary Analysis part configurations. The XML part mapping file has a separate format for different element types.

Sample XML Part Mapping Files and Schema Definition File

The default XML part mapping file is installed to the following folder:

C:\ProgramData\Autodesk\SSA <version>\Support\SSA_Mapping_Definition_Civil.XML

Note: The part mapping file must exist in the above location and must be named the same as the default file. You can swap out the XML part mapping file with other versions of the file by backing up the original file and replacing it with a different version of the file, perhaps for different customer projects or projects for different approving authorities. Local, State or County agencies may want to use this Part Matching file.

This default file is an empty placeholder file so that the prior version's behavior is maintained for users unaware of this available functionality. To use the XML part mapping functionality, you would set up a valid part mapping file. A sample valid file is available in the following path, but it requires customization to meet each organization's standards:

C:\Program Files(x86)\Autodesk\SSA <version>\Samples\Part Matching

The example file included in Storm and Sanitary Analysis provides an entry for each part family that is included by default in Autodesk Civil 3D.

For more detail on the XML format, refer to the SSA_Mapping_Definition schema and description files located in the following folder:

C:\Program Files(x86)\Autodesk\SSA <version>\Samples\Part Matching

A document that describes the schema file is named SSA_Mapping_Definition.docx.

Format of the XML Part Mapping File

The XML part mapping file consists of two sections:

  • The Autodesk Civil 3D part section (MatchedPart)
  • The Storm and Sanitary Analysis part section (SSAPart)

The Autodesk Civil 3D Matched Part portion of the XML file is bounded by a <MatchedPart> begin tab, and a </MatchedPart> close tag. For each Autodesk Civil 3D part, or multiple parts, the Autodesk Civil 3D Part ID (part family GUID) and description will be within the matched part construct.

Each Matched Part within a <ClassMapping> element must have a matching singular SSA Part element.

An example of an XML part mapping file is shown below. This example shows the mapping between a custom Autodesk Civil 3D Part Family name "InltCurb1" to an FDOT Curb Inlet Type 1 found in Storm and Sanitary Analysis. 

<ClassMapping> 
    <MatchedPart> 
      <Civil3DPart GUID = "260FBCAD-7BFC-4DC4-AD9C-84D552C799F5" Desc = "InltCurb1"/> 
    </MatchedPart>
    <SSAPart Element = "Inlet">
      <Inlet Manufacturer = "FDOT" PartNumber = "Curb Inlet - Type 1"/>  
    </SSAPart>
</ClassMapping>

Using the "Custom" Attribute

The matching SSA Part can be as specific or generic as desired. If a fixed Storm and Sanitary Analysis part does not fit your needs, the use of the Custom attribute with a value of "True" enables you to alter some hard coded part values giving you control of specific settings within Storm and Sanitary Analysis.

XML Part Mapping File Matching Process

Import process

  • When Storm and Sanitary Analysis imports an STM file, it compares the Part IDs in the STM file to the Part IDs in the XML part mapping file.
  • Storm and Sanitary Analysis then uses the indicated Storm and Sanitary Analysis Part in the XML file to create and define the element.
  • The Part ID is cached for the element in the Storm and Sanitary Analysis file for subsequent use exporting to a Hydraflow Storm Sewers file. If the Part ID found in the STM file is not found in the XML part mapping file, then the Line Type and/or Junction Type values found in the STM file will be used.

Export process

  • When Storm and Sanitary Analysis exports to an STM file, it checks for the Storm and Sanitary Analysis part type in the XML part mapping file for each element.
  • Storm and Sanitary Analysis then writes the corresponding Part ID to the STM file if a match is found.
    Note: In cases where there are duplicate matches for the same Storm and Sanitary Analysis Part configuration, Storm and Sanitary Analysis will use the initial cached Part ID if it is one of the matches. Otherwise Storm and Sanitary Analysis will use the first match found in the part mapping XML file. Therefore, the order in the part mapping XML file can be an important consideration.
  • If a match cannot be found, then a Part ID is not written to the STM file for that element.

When Autodesk Civil 3D imports data from an STM file, the part matching behavior is based on the new Autodesk Civil 3D settings.

Customizing an XML Part Mapping File

The XML part mapping file can be edited with Notepad or an XML editor. Only the contents of the ClassMappings tag should be edited. The individual mappings are each contained within the singular ClassMapping tags (see example below).

For each part to be mapped, the schema requires attributes for the Autodesk Civil 3D Part, followed by the Storm and Sanitary Analysis Part.

The Autodesk Civil 3D Part requires the GUID (Part ID), followed by the Description (the description is used to make the file easier to read, but it is not actually used in matching).

The Part ID can be found in the Part Family's XML file which is found in a subfolder of the Part Catalog. The Part Catalog is set within Autodesk Civil 3D (Home tab Create Design Set Pipe Network Catalog). The default path for the Part Catalog is: C:\ProgramData\Autodesk\C3D <version>\enu\Pipes Catalog\. For more information, see To Specify the Pipe Network Part Catalog.
Note: A quick way to determine the Part ID is to create the desired pipes and structures in a drawing and export the file to an STM file. The IDs are written to the STM file.

Below is an example showing a Part ID (in bold text) for the Imperial Concentric Cylindrical Structure which is found in the following subfolder and file: …\US Imperial Structures\Junction Structures with Frames\ AeccStructConcentricCylinder_Imperial.xml

<ColumnConst desc="Part ID" dataType="string" unit="" name="PrtID" id="CC5" visible="0" context="Catalog_PartID"index="0">CFDB68E2-8070-4463-8BA0-F44037BAF991</ColumnConst>

The Storm and Sanitary Analysis Part requires the element type, optionally followed by attributes that will vary depending on the element being matched. Be sure to match Autodesk Civil 3D Pipe families to Storm and Sanitary Analysis Link elements, and Autodesk Civil 3D Structure families to Storm and Sanitary Analysis Node elements.

Storm and Sanitary Analysis Node Elements Storm and Sanitary Analysis Link Elements

Junction

Conveyance Link

Inlet

Pump

Storage

Orifice

Outfall

Weir

Flow Diversion

Outlet

The following examples show Autodesk Civil 3D parts that are matched to different types of Storm and Sanitary Analysis parts. The bold items are the attributes that should be edited to make the proper matching. The items in red are the schema tag names and would likely not change for the same element type.

This format could also be used for most of the other elements, except Inlets and Conveyance Links. For example, you could replace "Junction" with the desired element type, such as "Storage", "Outfall", "FlowDiversion", and so on.

Junctions (or other nodes)

Combination Inlet

Curb Inlet

Grate Inlet

Maximum Capture Cutoff

Median & Ditch Inlet

Conveyance Link: Pipe

The Conveyance Link Type could include: Pipe, Open Channel, Culvert, or Direct.

The shape will vary depending on the type chosen (refer to available shapes for each type inside Storm and Sanitary Analysis.)

Conveyance Link: Culvert (with culvert type and entrance attributes)

Special Case: Custom Inlets

The Inlet element in Storm and Sanitary Analysis is a special case since there are additional "dimensional" attributes that could be used to map to a more specific cataloged part. More information is available in the SSA_Mapping_Definition.docx file mentioned above. Be sure to use the appropriate attributes for the specific part in Storm and Sanitary Analysis that you are mapping to.

Example: (this example maps to a custom FDOT circular grate with custom attributes)

Special Case: Outfalls

Outfalls are not addressed by the solution because they do not have a part ID associated with them. In an STM file the last, most downstream node is an outfall, and outfalls do not have any properties in the STM file. The outfall nodes cannot be assigned a JunctionType or GUID in the STM file. This is not an issue for Storm and Sanitary Analysis since these will simply be imported as Storm and Sanitary Analysis Outfalls. However, when importing the data back into Autodesk Civil 3D, the outfall will use the Part Family assigned to "Headwall" on the Import tab of the Part Matching Defaults Feature Settings.

Import and Export Part Matching Example

The following sections use a simple example to explain the part mapping system and settings.

Exporting Pipes from Autodesk Civil 3D

The following scenario starts with creating two pipes of different types in your drawing, and then exporting to an STM file and examining the properties of that file.

  1. For the purposes of this example, create two unconnected pipes in Autodesk Civil 3D using the Storm Sewers part list with Null structures:
    • 12 inch Concrete Pipe
    • 4 inch Corrugated HDPE Pipe
  2. Open the Pipe Network Feature Settings dialog box and examine the Part Matchup Settings. On the Export tab:
    • The Concrete pipe is mapped to Circular Pipe
    • The HDPE pipe is mapped to Circular Pipe

    This means that both pipe types will be exported to the Circular Pipe type.

  3. On the Import tab, under Importing Pipes, Circular Pipes can only match to one type, "Concrete Pipe."

    This means that by default, circular pipes that are not concrete, such as the Corrugated HDPE pipe, will be switched to Concrete on import. The following example shows how to set up the XML part mapping file so the pipe type is retained on import.

  4. Ensure that the Use Imported Part ID for Part Family setting is set to Yes.
  5. Ensure that Allow Part Family Swapping is set to Yes.
  6. Export the pipes to an STM file.
  7. Open the STM file in a text editor and examine its properties.
    • The concrete pipe appears as follows:

      "Line Type = ","Cir"

      "Line Part ID = ","30921980-2D9B-493A-88C5-6D10AEA8B835"

      "Line Part Description = ","AeccCircularConcretePipe_Imperial"

    • The HDPE pipe appears as follows:

      "Line Type = ","Cir"

      "Line Part ID = ","864CAB49-5CD4-47E7-978B-A0E9D6B8107C"

      "Line Part Description = ","AeccCircularCorrugatedHDPEPipe_Imperial"

    Tip: Exporting your pipe network to an STM file is a quick way to identify the part IDs required for the XML part mapping file.
  8. Examine the STM Part Types Table in this topic.

    Note that the Line Type above, Cir, will by default map to Conveyance Link - Circular Pipe.

Importing into, and Exporting Out of Storm and Sanitary Analysis Without Mappings Set Up in an XML Part Mapping File

The following scenario continues from the above steps and assumes you have created the STM file, and that you have the default XML part mapping file with no mappings specified.

  1. In Autodesk Storm and Sanitary Analysis, open a new project and import the STM file you created above.
  2. Examine properties of the elements that are created.
    • The pipes are both created as Conveyance Link - Circular Pipe.
  3. Export the pipe network from Storm and Sanitary Analysis to the Hydraflow Storm Sewers format.
  4. Examine the STM file.
    • The concrete pipe appears as follows:

      "Line Type = ","Cir"

      "Line Part ID = ","30921980-2D9B-493A-88C5-6D10AEA8B835"

      "Line Part Description = ","AeccCircularConcretePipe_Imperial"

    • The HDPE pipe appears as follows:

      "Line Type = ","Cir"

      "Line Part ID = ","864CAB49-5CD4-47E7-978B-A0E9D6B8107C"

      "Line Part Description = ","AeccCircularCorrugatedHDPEPipe_Imperial"

  5. Import the STM file into Autodesk Civil 3D.
  6. Examine the pipe network properties.
    • The pipe originally defined as concrete pipe has maintained its definition as a 12 inch concrete pipe.
    • However, the pipe originally defined as a 4 inch HDPE pipe has been changed to a 12 inch concrete pipe. This is because circular pipes imported from STM files have only one mapping setting in the Import settings as noted above.

    To work around this issue, you can set up specific mappings in the XML part mapping file, as described below.

Importing into Storm and Sanitary Analysis With Mappings Set Up in an XML Part Mapping File

The following scenario continues from the above steps and assumes you have created the STM file.

  1. Open the default XML part mapping file with a text editor. This file is located in C:\ProgramData\Autodesk\SSA <version>\Support\SSA_Mapping_Definition_Civil.XML.
  2. Add the following mapping for the concrete pipe: 
    <ClassMapping> 
    <MatchedPart> 
      <Civil3DPart GUID="30921980-2D9B-493A-88C5-6D10AEA8B835" Desc="AeccCircularConcretePipe_Imperial"/> 
    </MatchedPart>
    <SSAPart Element="ConveyanceLink">
      <ConveyanceLink Type="Pipe">
      <Pipe Shape="Circular"/>  
    </SSAPart>
</ClassMapping>
  3. Add the following mapping for the HDPE pipe: 
    <ClassMapping> 
    <MatchedPart> 
      <Civil3DPart GUID="864CAB49-5CD4-47E7-978B-A0E9D6B8107C" Desc="AeccCircularCorrugatedHDPEPipe_Imperial"/> 
    </MatchedPart>
    <SSAPart Element="ConveyanceLink">
      <ConveyanceLink Type="Pipe">
      <Pipe Shape="Circular"/>  
    </SSAPart>
</ClassMapping>
    Note: The above mappings preserve the existing definition of Circular Pipe when exported into Storm and Sanitary Analysis, but could also be mapped to a specific part in Storm and Sanitary Analysis if desired.
  4. Import the STM file into Autodesk Civil 3D again.

    This time, since you have the mappings set up in the XML Part Mapping file, the pipes are correctly restored to their original definitions.

  5. Examine the pipe network properties.
    • The pipe originally defined as concrete pipe has maintained its definition as a 12 inch concrete pipe.
    • The pipe originally defined as a 4 inch HDPE pipe has maintained its definition as a 4 inch Corrugated HDPE pipe.
    Note: If you do not obtain the above results, ensure that Use Imported Part ID for Part Family setting is set to Yes.

This is just one example of how the XML part mapping file can be used to maintain data integrity when moving data between Autodesk Civil 3D and Autodesk Storm and Sanitary Analysis. Although this example set both pipes to a circular pipe in Storm and Sanitary Analysis, you can also control the name of the part on import into Storm and Sanitary Analysis by modifying the SSA Part Element settings in the XML part mapping file.

Parent topic: Analyzing Catchments in Storm and Sanitary Analysis