The advanced part selection allows you to select parts depending on whether they meet certain properties:
Select Parts by Outbox
To select parts by outbox size you have the options:
- Outbox is larger than and Outbox is smaller than
- Fields to specify a value for the lengths along each cardinal axes
- A selection whether all three length values must be met (in all directions or in at least one direction)
- A selection to Ignore orientation checkbox to ignore the current orientation of the part.
Select Parts by Volume
Parts can be selected by their volume being larger or smaller than a given value.
Note: Parts with holes do not have a volume and cannot be selected with this method.
Select Parts by Quality
You may have Netfabb select:
- all valid parts (closed and correctly oriented parts)
- all faulty parts (parts that are not valid)
- all closed parts (no open triangle edges or holes)
- all parts with holes (parts with open edges)
- all oriented parts (all triangles are oriented correctly)
- all non-oriented parts (contains triangles which are not oriented correctly)
- all parts with more than one shell
- all parts with exactly one shell
Select Parts by Number of Triangles
Parts can be selected depending on whether their number of triangles is larger or smaller than a given value.
Select Parts by Their Z Height
Parts can be selected by their Z height meeting one of these options:
- parts are completely over
- parts are partly over
- parts are completely under
- parts are partly under
... a given value.