Modify hole instance properties to change the number of holes, hole types, diameter, and more.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Structural | |
| Type | Specifies the type of hole. Either Round Hole, Slotted Hole, Countersink, Blind Hole, Threaded Hole, Countersunk Hole, or Punchmark. |
| Diameter | Specifies the diameter of the hole. |
| Number on side 1 | (Square sketched patterns only) The number of holes distributed along the longer sketched side of the hole pattern. This number populates each instance of the Number on side 2 parameter. |
| Number on side 2 | (Square sketched patterns only) The number of holes distributed along the shorter sketched side of the holepattern. This number populates each instance of the Number on side 1 parameter. |
| Length on side 1 | (Square sketched patterns only) The length of the longest sketched side of the hole pattern. |
| Length on side 2 | (Square sketched patterns only) The length of the shorter sketched side of the hole pattern. |
| Intermediate distance on side 1 | (Square sketched patterns only) The distance between holes along the longer sketched side of the hole pattern. |
| Intermediate distance on side 2 | (Square sketched patterns only) The distance between holes along the shorter sketched side of the hole pattern. |
| Edge distance on side 1 | (Square sketched patterns only) The distance between the edge of the steel element and the first hole along the longer sketched side of the hole pattern. |
| Edge distance on side 2 | (Square sketched patterns only) The distance between the edge of the steel element and the first hole along the shorter sketched side of the hole pattern. |
| Radius | (Circular sketched patterns only) The radius of the sketched circular hole pattern. |
| Number | (Circular sketched patterns only) The number of holes distributed around the sketched circular hole pattern. |
| Identity Data | |
| Image |
Associates an image with the selected element instance. Click the value field and then the browse button to open the Manage Images dialog. See Manage Images Dialog. |
| Comments | User comments for the element. |
| Mark |
A label created for the element. Possible use: shop mark. This value must be unique for each element in a project. Revit warns you if the number is already used but allows you to continue using it. You can see the warning using the Review Warnings tool. See Review Warning Messages. |