To run the model, from a command line run:
$ pan -b STLH_t
The analysis progress is written to file STLH_t.out. To check progress run:
$ tail STLH_t.out
After the analysis completes, the last few lines of the output file STLH_t.out should be similar to the following:
Increment end CPU wall for increment 33 = 00:00:01.58, since start = 00:00:40.91 inc = 34 time = 11921.886 iter = 1 eps = 0.60531E+03 inc = 34 time = 11921.886 iter = 2 eps = 0.11601E-11 Finished writing file results\ STLH_t_34.case Writing record: 2, time: 12070.1080521538 Increment end CPU wall for increment 34 = 00:00:00.67, since start = 00:00:41.58 Layer end Mesh preview volume = 17181.8507391381 Activated volume = 16969.6503833795 Activated percentage = 98.7649738146357 Finished writing file .\ STLH_t.case Analysis completed **************************** 2 Warnings **************************** **************************** 1 Critical warning **************************** CPU wall for printing = 00:00:23.39 CPU wall = 00:00:41.63 CPU total = 00:01:46.81 Peak RAM used for this process = 223,880 kB END Autodesk Netfabb Local Simulation
Actual CPU times will differ.
Run the mechanical analysis from the command line:
$ pan -b STLH_m
After the analysis completes, the last few lines of the output file STLH_m.out should be similar to the following:
------------------------------------------ Support structure removal time increment ------------------------------------------ CPU wall for substrate removal = 00:00:02.08 inc = 38 time = 211921.89 iter = 1 eps = 0.36883E+03 inc = 38 time = 211921.89 iter = 2 eps = 0.17038E-09 Optimizing rigid body motion... Initial RMS displacement = 1.185526E-01 Optimized RMS displacement = 8.882039E-02 Number of optimization iterations = 305 Rotation matrix = 1.000000E+000 3.209669E-005 2.488942E-005 -3.211007E-005 9.999999E-001 5.375605E-004 -2.487216E-005 -5.375613E-004 9.999999E-001 Translation = 4.584022E-003 1.309558E-002 6.933183E-002 Finished writing file results\ STLH_m_38_f.case Finished writing file results\ STLH_m_38.case Increment end CPU wall for increment 38 = 00:00:02.65, since start = 00:01:32.83 Layer end ------------------------------------------------------ Total number of equilibrium iterations: 85 Mesh preview volume = 17181.8507391381 Activated volume = 16969.6503833795 Activated percentage = 98.7649738146357 Finished writing file .\ STLH_m_f.case Finished writing file .\ STLH_m.case Analysis completed **************************** 36 Warnings **************************** **************************** 3 Critical warnings **************************** CPU wall for support removal = 00:00:02.70 CPU wall = 00:01:32.88 CPU total = 00:05:18.27 Peak RAM used for this process = 1,200,364 kB END Autodesk Netfabb Local Simulation
Actual CPU times will differ. Each of the warnings note a support structure element failure.