To Change the Level of Multiple Part-Based Pressure Network Parts

Use this command to change the depth of part-based pressure network parts.

1. Select a part-based pressure network. The Pressure Networks contextual ribbon tab is displayed.
2. On the Modify panel, click Edit Network Profile Layout Tools Find.
3. Click Change Level Find.
4. Select the parts to edit.
5. Specify the base point and the end point. These points define the depth and direction (positive or negative) of the level edit.

   Stations, lengths and bend angles are not changed when the levels are modified. Connections are maintained between the parts that are moved but are broken at the start and end points of the selection.

The following illustration shows the selection of parts to edit and the resulting change to the part levels.