To Work with Pressure Network Properties

You can view and edit pressure network properties in the panorama window, in properties dialog boxes and in the Prospector item view.

To access pressure network properties in the panorama window

• On the Pressure Network Plan Layout ribbon tab, click Layout panel Panorama .
• On the Pressure Network Profile Layout ribbon tab, click Modify panel Panorama .

The panorama window has vistas (tabs) for viewing and editing the properties of pressure pipes, fittings and ancillaries.

For more information, see Pressure Network Vistas.

To access overall pressure network properties in the Pressure Pipe Network Properties dialog box

1. Select a pressure network part or pipe-run.
2. On the Pressure Network Plan Layout ribbon tab, click Properties panel Network Properties .

You can change the label styles, parts list, reference surface, reference alignment and layers of a selected pressure network.

For more information, see Pressure Pipe Network Properties Dialog Box.

To access properties for pressure pipes, fittings, and ancillaries in properties dialog boxes

1. Select a pressure network part.
2. On the Pressure Network Plan Layout ribbon tab, click Properties panel Part Properties . A part specific dialog box will open. For more information, see Pressure Pipe Properties Dialog Box, Fitting Properties Dialog Box and Ancillaries Properties Dialog Box.

The properties available include the reference surface and reference alignment for the part, the geometry and part data properties and properties for connections. Some properties are read-only.

Note: The Pressure Pipe Properties, Fitting Properties and Ancillaries Properties dialog boxes each have a Part Data section on their Part Properties tabs.

If a property listed in the Part Data section has a Value field that is blank, it means that the part does not have a value defined for that property in the part catalog.

You can use the Catalogue Editor (Autodesk.Aec.Content.CatalogEditor.exe, located in C:\Program Files\AutoCAD 2022\C3D) to edit the metadata for the parts and assign values and then you can recreate the parts in the drawing so they will have these property values and can be labelled with them. Edits that are made to the data in the Catalog Editor are not applied to existing parts in drawings.

To edit properties in the Prospector item view

1. In Toolspace, on the Prospector tab, expand Pressure Networks <pressure network>.
2. Click the Pressure Pipes, Fittings or Ancillaries collection to display information about the items in the collection in the item view. For more information, see About the Toolspace Item View.