The list frame is defined by two diagonal points. Once the frame is created, you can control the list layout: the size and the format. The list format is set by a template.
Access the command
In the Labels & Dimensions Management panel, click
(Insert a drawing list).
Command line: _AstM4CommDetInsertBom
Create a list on a drawing
- Open a detail drawing.
- In the Labels & Dimensions Management panel, click
(Insert a drawing list).
- Select a point for the top right corner of the frame.
- Select a point for the lower left corner of the frame.
- The List dialog box appears.
- On the Layout tab, define two fixed points of the list to specify the required width: the top right corner and the left corner.
Note: Points for the list height should not be selected since it would prevent the list from extending as more material is added.
- On the Template tab, select the desired template.
- Close the dialog box.
- The frame is created and the list must be
updated.
Modify the list template
- Select the list or the list frame.
- Right click and select Advance Properties from the contextual menu.
- In the properties dialog box, select the Template tab.
- Select the desired template from the list.