Use this procedure to add the steel and concrete shapes to the composite column.
- Select the column, and click


.
- Click Design Rules.
- Click Show Details.
- Select Unnamed under Component, and enter Component 1.
- Under Start Shape, select 16X16 from the Name list.
- Click Add.
A new component is added to the design rules of the column. By default, the start and end shapes are the same as the preceding component.
- Select Unnamed under Component, and enter Component 2.
- Under Start Shape for Component 2, select W8X31 from the Name list.
Do not change the other Start Shape parameters.
- Click OK.
The composite column displays in your drawing.