To Change Radial Layout Grids

Use this procedure to change the angle or size of a radial layout grid. You can also change the number and size of the grid bays.

If you use grips to stretch a radial layout grid, the behavior of the radial layout grid depends on the spacing type of each axis. The overall size of the grid “jumps” in directions that are specified to use a certain bay size with repeat spacing because the exact bay size is maintained. The overall size changes in directions that are specified to be evenly spaced or manually spaced.

1. Double-click one or more 2D layout grids.
2. On the Properties palette, expand Basic, expand General.
3. Expand Dimensions and enter new values for the width and angle.
4. Expand X Axis, and depending on the layout type, enter new values for Number of bays, Bay size, Inside radius, and End offset.
5. Expand Y Axis, and depending on the layout type, enter new values for Number of bays, Bay angle, Start angle offset, and End angle offset.