- On the Status Bar, right-click on snap mode and select Snap Settings.
Find
Note: The status bar is located in the lower right-hand corner of the application window.
- In the Drafting Settings dialog box, Snap and Grid tab, click Snap On.
- Under Snap Type, make sure Grid Snap and Rectangular Snap are selected.
- In the Snap
X Spacing box, enter the horizontal snap spacing value in units.
Note: The check box, Equal X and Y Spacing, applies to both snap and grid spacing.
- Modify other settings as needed.
Note: Snap mode can be turned on and off with the F9 key. You can suppress snap
temporarily by holding down F9 while you create or modify an object.